Datasheet Texas Instruments DP83849IF — 数据表
制造商 | Texas Instruments |
系列 | DP83849IF |
带光纤支持(FX)和Flex端口交换机的PHYTER双路工业温度双端口10/100 Mb Eth物理层传输
数据表
PHYTER DUAL Ind Temp w/FX & Flex Port sw Dual Port 10/100 Mb/s E-net PHY X-ceivr datasheet
PDF, 1.3 Mb, 修订版: D, 档案已发布: Apr 15, 2013
从文件中提取
价格
状态
DP83849IFVS/NOPB | DP83849IFVSX/NOPB | |
---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | No |
打包
DP83849IFVS/NOPB | DP83849IFVSX/NOPB | |
---|---|---|
N | 1 | 2 |
Pin | 80 | 80 |
Package Type | PFC | PFC |
Industry STD Term | TQFP | TQFP |
JEDEC Code | S-PQFP-G | S-PQFP-G |
Package QTY | 119 | 1000 |
Carrier | JEDEC TRAY (10+1) | LARGE T&R |
Device Marking | DP83849IFVS | DP83849IFVS |
Width (mm) | 12 | 12 |
Length (mm) | 12 | 12 |
Thickness (mm) | 1 | 1 |
Pitch (mm) | .5 | .5 |
Max Height (mm) | 1.2 | 1.2 |
Mechanical Data | 下载 | 下载 |
参数化
Parameters / Models | DP83849IFVS/NOPB | DP83849IFVSX/NOPB |
---|---|---|
Cable Length, m | 137 | 137 |
Datarate, Mbps | 10/100 | 10/100 |
Function | PHY | PHY |
Interface | MII,RMII,SNI | MII,RMII,SNI |
JTAG1149.1 | Yes | Yes |
Operating Temperature Range, C | -40 to 85 | -40 to 85 |
Package Group | TQFP | TQFP |
Package Size: mm2:W x L, PKG | 80TQFP: 196 mm2: 14 x 14(TQFP) | 80TQFP: 196 mm2: 14 x 14(TQFP) |
Port Count | Dual | Dual |
Rating | Catalog | Catalog |
Special Features | FX Support,Cable Diagnostics,Flex Port | FX Support,Cable Diagnostics,Flex Port |
Supply Voltage, Volt | 3.3 | 3.3 |
生态计划
DP83849IFVS/NOPB | DP83849IFVSX/NOPB | |
---|---|---|
RoHS | Compliant | Compliant |
应用须知
- AN-1469 PHYTERВ® Design & Layout Guide (Rev. D)PDF, 289 Kb, 修订版: D, 档案已发布: Apr 26, 2013
This application report describes PHYTERв„ў design and layout guidelines. - AN-1508 DP83849 Cable Diagnostics (Rev. A)PDF, 454 Kb, 修订版: A, 档案已发布: Apr 26, 2013
This application report describes the features incorporated in the DP83849 for detecting cabling faults andmonitoring link status in a Twisted Pair cabling environment. - Reducing Radiated Emissions in Ethernet 10/100 LAN Applications (Rev. A)PDF, 70 Kb, 修订版: A, 档案已发布: Apr 26, 2013
This application report explains how Texas Instruments' PHYTER products help system designers toreduce radiated emissions in Ethernet 10/100 LAN applications. - AN-1509 PhyterDual Flexible Port Switching (Rev. B)PDF, 118 Kb, 修订版: B, 档案已发布: Apr 26, 2013
Texas Instruments flexible port switching offers an unprecedented number of ways for system designers todevelop solutions that address specific application needs with the minimum number of components. Thecombination of flexible assignment of data paths between ports and the ability to change theseassignments dynamically allow one part to meet many different needs. In addition to this flexibi - PHYTERВ® Family of High-Speed Industrial Connectivity DevicesPDF, 153 Kb, 档案已发布: May 15, 2012
- AN-1540 Power Measurement of Ethernet Physical Layer Products (Rev. B)PDF, 79 Kb, 修订版: B, 档案已发布: Apr 26, 2013
System designers require accurate component power consumption specifications, for the purposes of thermal management, component selection, and power distribution planning. - AN-1507 DP83848 and DP83849 100Mb Data Latency (Rev. B)PDF, 301 Kb, 修订版: B, 档案已发布: Apr 26, 2013
The purpose of this document is to define the 100Mb Transmit and Receive latencies of the TexasInstruments Semiconductor DP83848 and DP83849 Ethernet Transceiver family, and to document theircontributions for end-to-end packet transfer in both MII and RMII modes of operation. - AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance (Rev. B)PDF, 126 Kb, 修订版: B, 档案已发布: Apr 26, 2013
The use of a reference clock that is less stable than those directly driven from an oscillator may be required for some applications. In addition, some customer applications may require partnering with devices that operate outside of the IEEE 802.3 standard for transmitted jitter.
模型线
系列: DP83849IF (2)
制造商分类
- Semiconductors> Interface> Ethernet