Datasheet Texas Instruments DS10CP154ATSQX/NOPB — 数据表

DS10CP154A
www.ti.com SNLS306C – AUGUST 2008 – REVISED APRIL 2013 DS10CP154A 1.5 Gbps 4x4 LVDS Crosspoint Switch
Check for Samples: DS10CP154A FEATURES DESCRIPTION The DS10CP154A is a 1.5 Gbps 4x4 LVDS
crosspoint switch optimized for high-speed signal
routing and switching over FR-4 printed circuit board
backplanes and balanced cables. Fully differential
signal paths ensure exceptional signal integrity and
noise immunity. The non-blocking architecture allows
connections of any input to any output or outputs.
The switch configuration can be accomplished via
external pins or the System Management Bus
(SMBus) interface. In addition, the SMBus circuitry
enables the loss of signal (LOS) monitors that can
inform a system of the presence of an open inputs
condition (e.g. disconnected cable). 1 DC -1.5 Gbps Low Jitter, Low Skew, Low
Power Operation
Pin and SMBus Configurable, Fully
Differential, Non-Blocking Architecture
Wide Input Common Mode Range Enables DC
Coupled Interface to CML or LVPECL Drivers
LOS Circuitry Detects Open Inputs Fault
Condition
On-chip 100 Ω Input and Output Termination …