Datasheet Texas Instruments DS90LV019 — 数据表

DS90LV019 DS90LV019 3.3V or 5V LVDS Driver/Receiver Literature Number: SNLS008B DS90LV019
3.3V or 5V LVDS Driver/Receiver
General Description Features The DS90LV019 is a Driver/Receiver designed specifically
for the high speed low power point-to-point interconnect applications. The device operates from a single 3.3V or 5.0V
power supply and includes one differential line driver and
one receiver. The DS90LV019 features an independent
driver and receiver with TTL/CMOS compatibility (DIN and
ROUT). The logic interface provides maximum flexibility as 4
separate lines are provided (DIN, DE, RE, and ROUT). The
device also features a flow-through pin out which allows
easy PCB routing for short stubs between its pins and the
connector. The driver has 3.5 mA output loop current.
The driver translates between TTL levels (single-ended) to
Low Voltage Differential Signaling levels. This allows for high
speed operation, while consuming minimal power with reduced EMI. In addition, the differential signaling provides
common-mode noise rejection.
The receiver threshold is В± 100 mV over a В± 1V commonmode range and translates the low swing differential levels
to standard (TTL/CMOS) levels. LVDS Signaling
3.3V or 5.0V operation
Low power CMOS design
Balanced Output Impedance
Glitch free power up/down (Driver disabled)
High Signaling Rate Capacity (above 100 Mbps) …