Datasheet Texas Instruments DS90UB913A-Q1 — 数据表
制造商 | Texas Instruments |
系列 | DS90UB913A-Q1 |
25-100MHz 10/12位FPD-Link III串行器
数据表
DS90UB913A-Q1 25-MHz to 100-MHz 10/12-Bit FPD-Link III Serializer datasheet
PDF, 1.7 Mb, 修订版: D, 档案已发布: Oct 29, 2016
从文件中提取
价格
状态
DS90UB913ATRTVJQ1 | DS90UB913ATRTVRQ1 | DS90UB913ATRTVTQ1 | |
---|---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | No | No |
打包
DS90UB913ATRTVJQ1 | DS90UB913ATRTVRQ1 | DS90UB913ATRTVTQ1 | |
---|---|---|---|
N | 1 | 2 | 3 |
Pin | 32 | 32 | 32 |
Package Type | RTV | RTV | RTV |
Industry STD Term | WQFN | WQFN | WQFN |
JEDEC Code | S-PQFP-N | S-PQFP-N | S-PQFP-N |
Package QTY | 2500 | 1000 | 250 |
Carrier | LARGE T&R | LARGE T&R | SMALL T&R |
Device Marking | UB913AQ | UB913AQ | UB913AQ |
Width (mm) | 5 | 5 | 5 |
Length (mm) | 5 | 5 | 5 |
Thickness (mm) | .75 | .75 | .75 |
Pitch (mm) | .5 | .5 | .5 |
Max Height (mm) | .8 | .8 | .8 |
Mechanical Data | 下载 | 下载 | 下载 |
参数化
Parameters / Models | DS90UB913ATRTVJQ1 | DS90UB913ATRTVRQ1 | DS90UB913ATRTVTQ1 |
---|---|---|---|
Color Depth, bpp | 12 | 12 | 12 |
Diagnostics | BIST | BIST | BIST |
EMI Reduction | - | - | - |
Function | Serializer | Serializer | Serializer |
Input Compatibility | LVCMOS | LVCMOS | LVCMOS |
Operating Temperature Range, C | -40 to 105 | -40 to 105 | -40 to 105 |
Output Compatibility | FPD-Link III LVDS | FPD-Link III LVDS | FPD-Link III LVDS |
Package Group | WQFN | WQFN | WQFN |
Package Size: mm2:W x L, PKG | 32WQFN: 25 mm2: 5 x 5(WQFN) | 32WQFN: 25 mm2: 5 x 5(WQFN) | 32WQFN: 25 mm2: 5 x 5(WQFN) |
Pixel Clock Min, MHz | 25 | 25 | 25 |
Pixel Clock(Max), MHz | 100 | 100 | 100 |
Rating | Automotive | Automotive | Automotive |
Signal Conditioning | - | - | - |
Special Features | CRC,I2C Config | CRC,I2C Config | CRC,I2C Config |
Total Throughput, Mbps | 1400 | 1400 | 1400 |
生态计划
DS90UB913ATRTVJQ1 | DS90UB913ATRTVRQ1 | DS90UB913ATRTVTQ1 | |
---|---|---|---|
RoHS | Compliant | Compliant | Compliant |
应用须知
- Sending Power over Coax in DS90UB913A DesignsPDF, 153 Kb, 档案已发布: Jun 26, 2014
The DS90UB913A was designed as a serializer to support automotive camera designs. Automotive cameras are often located in remote positions such as bumpers or trunk lids, and a major component of the system cost is the wiring. For this reason it is desirable to minimize the wiring to the camera. FPD III systems allow the video data, along with a bidirectional control channel, an - Cable Requirements for the DS90UB913A and DS90UB914APDF, 41 Kb, 档案已发布: Oct 14, 2014
The DS90UB913A and DS90UB914A chipset transports serialized video data over coaxial cables. A variety of cable assemblies meeting this generic description are available on the market, and not all perform equally. This document defines the cable characteristics required to properly support the high speed serial data transfer from a DS90UB913A serializer to a DS90UB914A deserializer. Three key pa - Ten tips for successfully designing with automotive EMC/EMI requirementsPDF, 380 Kb, 档案已发布: Jul 24, 2015
- I2C Communication over DS90UB913/4 FPD Link-III with BCCPDF, 4.9 Mb, 档案已发布: Apr 22, 2013
This application note describes I2C communication between DS90UB913/914 devices through the FPDLinkIII bidirectional control channel (referred as BCC). The low latency BCC interface allows the masterI2C device to remotely communicate with peripherals across the serial link. - Analog Applications Journal 3Q 2015PDF, 7.1 Mb, 档案已发布: Jul 24, 2015
模型线
系列: DS90UB913A-Q1 (3)
制造商分类
- Semiconductors> Interface> Display & Imaging SerDes> FPD-Link III SerDes