Datasheet Texas Instruments LDC0851 — 数据表
| 制造商 | Texas Instruments |
| 系列 | LDC0851 |
差分补偿和高精度感应开关
数据表
价格
状态
| LDC0851HDSGR | LDC0851HDSGT | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes |
打包
| LDC0851HDSGR | LDC0851HDSGT | |
|---|---|---|
| N | 1 | 2 |
| Pin | 8 | 8 |
| Package Type | DSG | DSG |
| Industry STD Term | WSON | WSON |
| JEDEC Code | S-PDSO-N | S-PDSO-N |
| Package QTY | 3000 | 250 |
| Carrier | LARGE T&R | SMALL T&R |
| Device Marking | 0851 | 0851 |
| Width (mm) | 2 | 2 |
| Length (mm) | 2 | 2 |
| Thickness (mm) | .75 | .75 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | 下载 | 下载 |
参数化
| Parameters / Models | LDC0851HDSGR | LDC0851HDSGT |
|---|---|---|
| # Input Channels | 1 | 1 |
| Analog Supply (V), Min | 3.3 | 3.3 |
| Interface | Push/Pull | Push/Pull |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 |
| Package Group | WSON | WSON |
| Package Size: mm2:W x L, PKG | See datasheet (WSON) | See datasheet (WSON) |
| Pin/Package | 8WSON | 8WSON |
| Rating | Catalog | Catalog |
| Sensor Frequency, Hz | 300KHz to 19MHz | 300KHz to 19MHz |
生态计划
| LDC0851HDSGR | LDC0851HDSGT | |
|---|---|---|
| RoHS | Compliant | Compliant |
应用须知
- LDC0851 Quick-Start GuidePDF, 1.1 Mb, 档案已发布: Mar 16, 2016
- LDC0851 - TroubleshootingPDF, 991 Kb, 档案已发布: Jan 3, 2017
- Reliably Detect Faults In Circuit Breakers Using Contactless Inductive SwitchesPDF, 581 Kb, 档案已发布: Mar 20, 2017
Circuit breakers are commonly used to manage theflow of electricity within a home or office but theirreliable functionality is often taken for granted. Circuitbreakers rely on making a solid electrical contactbetween the AC mains and the rest of the circuitry withthe ability the open the circuit in the case of a shortcircuit or power surge. While this is a very robustmethod towards m - LDC1xxx LDC Target Design (Rev. A)PDF, 907 Kb, 修订版: A, 档案已发布: May 9, 2017
Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide - LDC Device Selection Guide (Rev. B)PDF, 360 Kb, 修订版: B, 档案已发布: Mar 21, 2017
- EMI Considerations for Inductive SensingPDF, 151 Kb, 档案已发布: Feb 22, 2017
This application note explains various EMI reduction techniques to help improve EMI performance for TI'sInductance-to-Digital Converters (LDC). Each section details a general technique with references to otheruseful online documents. A list of relevant EMI reduction techniques is provided for specific devices withinthe LDC family of products. - Measuring Rp of an L-C Sensor for Inductive SensingPDF, 205 Kb, 档案已发布: Oct 1, 2015
When designing an application using TI’s LDC series of inductive sensors, it is necessary to know the L-C sensor’s equivalent parallel resistance RP at the sensor’s resonant frequency. The RP value changes as the target is moved; the minimum RP occurs when the metal target is closest to the sensor. The maximum RP occurs when the target is at the farthest distance. Accordingly, both values should b
模型线
系列: LDC0851 (2)
制造商分类
- Semiconductors> Sensing Products> Inductive Sensing> Inductive Switches