Datasheet Texas Instruments LDC1000NHRT — 数据表

制造商	Texas Instruments
系列	LDC1000
零件号	LDC1000NHRT

数据表

价格

状态

打包

生态计划

设计套件和评估模块

• Evaluation Modules & Boards: LDC1000EVM
  LDC1000EVM - Evaluation Module for Inductance to Digital Converter with Sample PCB Coil
  Lifecycle Status: Active (Recommended for new designs)
  
  • 下载

应用须知

• 下载
  Interfacing LDC1000 with the MSP430 LaunchPad
  PDF, 708 Kb, 档案已发布: Oct 17, 2013
  The LDC1000 is a programmable inductance-to-digital converter for use in inductance-sensingapplications. It offers a complete signal path solution between an LC tank and a microcontroller byproviding proximity and inductance data. The MSP430 is an ideal microcontroller solution for low-cost,low-power precision sensor applications because it consumes very little power. This library provides
• 下载
  LDC1000 Temperature Compensation
  PDF, 308 Kb, 档案已发布: Sep 12, 2013
  LDC1000 is a high-precision Inductance-to-Digital converter with internal precision of 0.1% over dynamicrange. However, other factors may influence measurement precision greatly, dominating the systemperformance. One of these is temperature variation.This App-note will discuss the physical effects of temperature variation on inductive sensing and providemethods to mitigate these effects.
• 下载
  Performing L Measurements from LDC DRDY Timing
  PDF, 66 Kb, 档案已发布: Nov 6, 2015
  TI’s LDC1000 and LDC1101 devices measure the resonant frequency of an LC tank to determine the inductance of a sensor. Some applications require higher measurement resolution than the LDC1000 or even LDC1101 can provide. With proper configuration of the LDC, an external time measurement device can be used for improved inductance measurement resolution.
• 下载
  Using Multiple Sensors With LDC1000
  PDF, 74 Kb, 档案已发布: Mar 2, 2015
• 下载
  Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. A)
  PDF, 255 Kb, 修订版: A, 档案已发布: Jun 1, 2015
  This application note reviews sensor RP configuration for LDC devices. LDC1000, LDC1041, LDC1051, LDC1312, LDC1314, LDC1612, LDC1614 are covered in this note. Clear understanding on how to set the RP_MIN and RP_MAX registers is necessary for not only RP measurements, but also for optimum L measurements. The fundamental principle of RP measurements is that magnetic fields from an LC circuit ge
• 下载
  LDC Device Selection Guide (Rev. B)
  PDF, 360 Kb, 修订版: B, 档案已发布: Mar 21, 2017
• 下载
  LDC Sensor Design
  PDF, 1.0 Mb, 档案已发布: Mar 24, 2015
  Getting the best performance out of an LDC requires a sensor suitable for the measurement. This app-note covers the parameters to consider when designing a sensor for a specific application. Specific areas of focus include the physical routing characteristics of PCB based sensors, considerations for the sensor capacitor, and techniques to minimize or compensate for parasitic effects.
• 下载
  LDC1xxx LDC Target Design (Rev. A)
  PDF, 907 Kb, 修订版: A, 档案已发布: May 9, 2017
  Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide
• 下载
  Measuring Rp of an L-C Sensor for Inductive Sensing
  PDF, 205 Kb, 档案已发布: Oct 1, 2015
  When designing an application using TI’s LDC series of inductive sensors, it is necessary to know the L-C sensor’s equivalent parallel resistance RP at the sensor’s resonant frequency. The RP value changes as the target is moved; the minimum RP occurs when the metal target is closest to the sensor. The maximum RP occurs when the target is at the farthest distance. Accordingly, both values should b

模型线

制造商分类

• Semiconductors > Sensing Products > Inductive Sensing > Inductance to Digital Converters