Datasheet Texas Instruments LMP7715 — 数据表

制造商Texas Instruments
系列LMP7715
Datasheet Texas Instruments LMP7715

单精度,17 MHz,低噪声,CMOS输入放大器

数据表

LMP7715/LMP7716/LMP7716Q Single/Dual Prec, 17MHz, Low Noise, CMOS Input Amps datasheet
PDF, 1.1 Mb, 修订版: E, 档案已发布: Mar 25, 2013
从文件中提取

价格

状态

LMP7715MF/NOPBLMP7715MFE/NOPBLMP7715MFX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYesYes

打包

LMP7715MF/NOPBLMP7715MFE/NOPBLMP7715MFX/NOPB
N123
Pin555
Package TypeDBVDBVDBV
Industry STD TermSOT-23SOT-23SOT-23
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY10002503000
CarrierLARGE T&RSMALL T&RLARGE T&R
Device MarkingAV3AAV3AAV3A
Width (mm)1.61.61.6
Length (mm)2.92.92.9
Thickness (mm)1.21.21.2
Pitch (mm).95.95.95
Max Height (mm)1.451.451.45
Mechanical Data下载下载下载

参数化

Parameters / ModelsLMP7715MF/NOPB
LMP7715MF/NOPB
LMP7715MFE/NOPB
LMP7715MFE/NOPB
LMP7715MFX/NOPB
LMP7715MFX/NOPB
Additional FeaturesN/AN/AN/A
ArchitectureCMOSCMOSCMOS
CMRR(Min), dB858585
CMRR(Typ), dB100100100
GBW(Typ), MHz171717
Input Bias Current(Max), pA111
Iq per channel(Max), mA1.41.41.4
Iq per channel(Typ), mA1.151.151.15
Number of Channels111
Offset Drift(Typ), uV/C111
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Output Current(Typ), mA212121
Package GroupSOT-23SOT-23SOT-23
Package Size: mm2:W x L, PKG5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)
Rail-to-RailIn to V-,OutIn to V-,OutIn to V-,Out
RatingCatalogCatalogCatalog
Slew Rate(Typ), V/us9.59.59.5
Total Supply Voltage(Max), +5V=5, +/-5V=105.55.55.5
Total Supply Voltage(Min), +5V=5, +/-5V=101.81.81.8
Vn at 1kHz(Typ), nV/rtHz5.85.85.8
Vos (Offset Voltage @ 25C)(Max), mV0.150.150.15

生态计划

LMP7715MF/NOPBLMP7715MFE/NOPBLMP7715MFX/NOPB
RoHSCompliantCompliantCompliant

应用须知

  • AN-1952 Designing with Thermocouples (Rev. A)
    PDF, 72 Kb, 修订版: A, 档案已发布: May 7, 2013
    In 1821 Thomas Seebeck discovered the physical phenomenon that when you join two dissimilar metalson both ends and heat one end, a continuous current is created in the thermoelectric circuit . If the otherend is broken, a voltage can be measured that is proportional to the temperature difference between theheated junction (measuring or hot junction) and the open end (reference or cold ju

模型线

制造商分类

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps