Datasheet Texas Instruments LMZ14201H — 数据表

制造商Texas Instruments
系列LMZ14201H
Datasheet Texas Instruments LMZ14201H

SIMPLESWITCHERВ®6V至42V,1A高输出电压电源模块

数据表

LMZ14201H SIMPLE SWITCHERВ® 6V to 42V, 1A High Output Voltage Power Module datasheet
PDF, 1.2 Mb, 修订版: H, 档案已发布: Sep 3, 2015
从文件中提取

价格

状态

LMZ14201HTZ/NOPBLMZ14201HTZE/NOPBLMZ14201HTZX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYesNo

打包

LMZ14201HTZ/NOPBLMZ14201HTZE/NOPBLMZ14201HTZX/NOPB
N123
Pin777
Package TypeNDWNDWNDW
Industry STD TermTO-PMODTO-PMODTO-PMOD
JEDEC CodeR-MSFM-PR-MSFM-PR-MSFM-P
Package QTY25045500
CarrierSMALL T&RTUBELARGE T&R
Device MarkingHTZHTZHTZ
Width (mm)9.859.859.85
Length (mm)10.1610.1610.16
Thickness (mm)4.574.574.57
Pitch (mm)1.271.271.27
Max Height (mm)4.84.84.8
Mechanical Data下载下载下载

参数化

Parameters / ModelsLMZ14201HTZ/NOPB
LMZ14201HTZ/NOPB
LMZ14201HTZE/NOPB
LMZ14201HTZE/NOPB
LMZ14201HTZX/NOPB
LMZ14201HTZX/NOPB
Iout(Max), A111
Iq(Typ), mA111
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Package Size: mm2:W x L, PKG7TO-PMOD: 140 mm2: 13.77 x 10.16(TO-PMOD)7TO-PMOD: 140 mm2: 13.77 x 10.16(TO-PMOD)7TO-PMOD: 140 mm2: 13.77 x 10.16(TO-PMOD)
Package TypeLeadedLeadedLeaded
Regulated Outputs111
Soft StartAdjustableAdjustableAdjustable
Special FeaturesEMI Tested,Enable,TrackingEMI Tested,Enable,TrackingEMI Tested,Enable,Tracking
Switching Frequency(Max), kHz100010001000
Switching Frequency(Min), kHz200200200
Switching Frequency(Typ), kHz800800800
Vin(Max), V424242
Vin(Min), V666
Vout(Max), V242424
Vout(Min), V555

生态计划

LMZ14201HTZ/NOPBLMZ14201HTZE/NOPBLMZ14201HTZX/NOPB
RoHSNot CompliantNot CompliantNot Compliant

应用须知

  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, 档案已发布: Aug 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Input and Output Capacitor Selection
    PDF, 219 Kb, 档案已发布: Sep 19, 2005
  • AN-2145 Power Considerations for SDI Products (Rev. B)
    PDF, 63 Kb, 修订版: B, 档案已发布: Apr 26, 2013
    This application report discusses the issues and trade-offs that VCC ripple has on the performance of SDI components.
  • AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
    PDF, 3.6 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
  • Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B)
    PDF, 996 Kb, 修订版: B, 档案已发布: Jan 20, 2016
  • AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A)
    PDF, 455 Kb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report focuses on the low current modules that come in a 7 lead, 10.16 x 4.57 x 9.81 mmpackage.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016
  • AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)
    PDF, 568 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application report provides an in-depth discussion of thermal design.
  • AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report discusses the best PCB layout methods, practices and techniques to maximize themodule’s performance.
  • AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C)
    PDF, 99 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    While the principles discussed in this application report apply more broadly to power design, we will focuson DC to DC convertor design given its broad application. It affects virtually every hardware engineer whoat some point has to design a power convertor. In this application report we will consider two commontrade-offs related to low EMI design; thermal performance and EMI and also solut
  • AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A)
    PDF, 1.4 Mb, 修订版: A, 档案已发布: Apr 26, 2013
    This application report discusses various solutions for meeting the power requirements of serial digital interface (SDI) video components.
  • AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A)
    PDF, 244 Kb, 修订版: A, 档案已发布: May 6, 2013
    This application report illustrates how to apply the LMZ14203 integrated buck module into the buck-boost configuration such that a positive input voltage can be used to create a regulated negative output voltage.
  • AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
    PDF, 82 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
  • AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
    PDF, 374 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
  • AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
    PDF, 2.5 Mb, 修订版: C, 档案已发布: Apr 24, 2013
    Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
  • AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
    PDF, 9.2 Mb, 修订版: B, 档案已发布: Apr 23, 2013
    This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

模型线

制造商分类

  • Semiconductors> Power Management> Power Modules> Non-Isolated Module> Step-Down (Buck) Module