Datasheet Texas Instruments LMZ14203HTZ/NOPB — 数据表

制造商Texas Instruments
系列LMZ14203H
零件号LMZ14203HTZ/NOPB
Datasheet Texas Instruments LMZ14203HTZ/NOPB

SIMPLESWITCHER®6V至42V,3A高输出电压电源模块7-TO-PMOD -40至125

数据表

LMZ14203H SIMPLE SWITCHERВ® 6V to 42V, 3A High Output Voltage Power Module datasheet
PDF, 1.3 Mb, 修订版: G, 档案已发布: Sep 3, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin77
Package TypeNDWNDW
Industry STD TermTO-PMODTO-PMOD
JEDEC CodeR-MSFM-PR-MSFM-P
Package QTY250250
CarrierSMALL T&RSMALL T&R
Device MarkingHTZLMZ14203
Width (mm)9.859.85
Length (mm)10.1610.16
Thickness (mm)4.574.57
Pitch (mm)1.271.27
Max Height (mm)4.84.8
Mechanical Data下载下载

参数化

Iout(Max)3 A
Iq(Typ)1 mA
Operating Temperature Range-40 to 125 C
Package Size: mm2:W x L7TO-PMOD: 140 mm2: 13.77 x 10.16(TO-PMOD) PKG
Package TypeLeaded
Regulated Outputs1
Soft StartAdjustable
Special FeaturesEMI Tested,Enable,Tracking
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)200 kHz
Switching Frequency(Typ)800 kHz
Vin(Max)42 V
Vin(Min)6 V
Vout(Max)24 V
Vout(Min)5 V

生态计划

RoHSNot Compliant

设计套件和评估模块

  • Evaluation Modules & Boards: LMZ14203HEVAL
    SIMPLE SWITCHERВ® Power Module 42Vin, High Output Voltage 3A Eval Board
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, 档案已发布: Aug 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B)
    PDF, 996 Kb, 修订版: B, 档案已发布: Jan 20, 2016
  • AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A)
    PDF, 455 Kb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report focuses on the low current modules that come in a 7 lead, 10.16 x 4.57 x 9.81 mmpackage.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report discusses the best PCB layout methods, practices and techniques to maximize themodule’s performance.
  • AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C)
    PDF, 99 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    While the principles discussed in this application report apply more broadly to power design, we will focuson DC to DC convertor design given its broad application. It affects virtually every hardware engineer whoat some point has to design a power convertor. In this application report we will consider two commontrade-offs related to low EMI design; thermal performance and EMI and also solut
  • AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A)
    PDF, 244 Kb, 修订版: A, 档案已发布: May 6, 2013
    This application report illustrates how to apply the LMZ14203 integrated buck module into the buck-boost configuration such that a positive input voltage can be used to create a regulated negative output voltage.

模型线

系列: LMZ14203H (3)

制造商分类

  • Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module