Datasheet Texas Instruments LMZ20502 — 数据表
制造商 | Texas Instruments |
系列 | LMZ20502 |
SIMPLESWITCHERВ®2.7V至5.5V,2A高密度纳米模块
数据表
LMZ20502 2 A SIMPLE SWITCHERВ® Nano Module datasheet
PDF, 2.0 Mb, 修订版: C, 档案已发布: Apr 24, 2015
从文件中提取
价格
状态
LMZ20502SILR | LMZ20502SILT | |
---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | No | Yes |
打包
LMZ20502SILR | LMZ20502SILT | |
---|---|---|
N | 1 | 2 |
Pin | 8 | 8 |
Package Type | SIL | SIL |
Package QTY | 3000 | 250 |
Carrier | LARGE T&R | SMALL T&R |
Device Marking | 7543 | 0502 |
参数化
Parameters / Models | LMZ20502SILR | LMZ20502SILT |
---|---|---|
Iout(Max), A | 2 | 2 |
Iq(Typ), mA | 0.072 | 0.072 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 |
Package Type | MicroSiP (LGA) | MicroSiP (LGA) |
Regulated Outputs | 1 | 1 |
Soft Start | Fixed | Fixed |
Special Features | EMI Tested,Enable,Light Load Efficiency,Power Good | EMI Tested,Enable,Light Load Efficiency,Power Good |
Switching Frequency(Max), kHz | 3200 | 3200 |
Switching Frequency(Min), kHz | 2500 | 2500 |
Switching Frequency(Typ), kHz | 3000 | 3000 |
Vin(Max), V | 5.5 | 5.5 |
Vin(Min), V | 2.7 | 2.7 |
Vout(Max), V | 3.6 | 3.6 |
Vout(Min), V | 0.8 | 0.8 |
生态计划
LMZ20502SILR | LMZ20502SILT | |
---|---|---|
RoHS | Compliant | Compliant |
应用须知
- AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)PDF, 298 Kb, 修订版: A, 档案已发布: Apr 23, 2013
The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501. - Understanding and Applying Current-Mode Control TheoryPDF, 409 Kb, 档案已发布: Aug 19, 2007
- AN-643 EMI/RFI Board Design (Rev. B)PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
Application Note 643 EMI/RFI Board Design - AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)PDF, 82 Kb, 修订版: C, 档案已发布: Apr 23, 2013
When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current - AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time. - AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)PDF, 9.2 Mb, 修订版: B, 档案已发布: Apr 23, 2013
This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP - AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)PDF, 3.6 Mb, 修订版: A, 档案已发布: Apr 23, 2013
This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor. - AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)PDF, 374 Kb, 修订版: C, 档案已发布: Apr 23, 2013
This application report provides SIMPLE SWITCHER™ PCB layout guidelines. - AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)PDF, 2.5 Mb, 修订版: C, 档案已发布: Apr 24, 2013
Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti - Semiconductor and IC Package Thermal Metrics (Rev. C)PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016
- Input and Output Capacitor SelectionPDF, 219 Kb, 档案已发布: Sep 19, 2005
模型线
系列: LMZ20502 (2)
制造商分类
- Semiconductors> Power Management> Power Modules> Non-Isolated Module> Step-Down (Buck) Module