Datasheet Texas Instruments LP38501-ADJ — 数据表
制造商 | Texas Instruments |
系列 | LP38501-ADJ |

用于2.7V至5.5V输入的3A FlexCap低压降线性稳压器
数据表
LP3850x-ADJ, LP3850xA-ADJ 3-A FlexCap Low Dropout Linear Regulator for 2.7-V to 5.5-V Inputs datasheet
PDF, 1.4 Mb, 修订版: I, 档案已发布: Aug 27, 2015
从文件中提取
价格
状态
LP38501ATJ-ADJ/NOPB | LP38501TJ-ADJ/NOPB | LP38501TS-ADJ/NOPB | LP38501TSX-ADJ/NOPB | |
---|---|---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | Yes | Yes | Yes |
打包
LP38501ATJ-ADJ/NOPB | LP38501TJ-ADJ/NOPB | LP38501TS-ADJ/NOPB | LP38501TSX-ADJ/NOPB | |
---|---|---|---|---|
N | 1 | 2 | 3 | 4 |
Pin | 5 | 5 | 5 | 5 |
Package Type | NDQ | NDQ | KTT | KTT |
Industry STD Term | TO-263 | TO-263 | TO-263 | TO-263 |
JEDEC Code | R-MSFM-L | R-MSFM-L | R-PSFM-G | R-PSFM-G |
Package QTY | 1000 | 1000 | 45 | 500 |
Carrier | LARGE T&R | LARGE T&R | TUBE | LARGE T&R |
Device Marking | LP38501A | LP38501 | TS-ADJ | LP38501 |
Width (mm) | 9.85 | 9.85 | 8.42 | 8.42 |
Length (mm) | 10.16 | 10.16 | 10.16 | 10.16 |
Thickness (mm) | 2 | 2 | 4.58 | 4.58 |
Pitch (mm) | 1.7 | 1.7 | 1.7 | 1.7 |
Max Height (mm) | 2.25 | 2.25 | 4.83 | 4.83 |
Mechanical Data | 下载 | 下载 | 下载 | 下载 |
参数化
Parameters / Models | LP38501ATJ-ADJ/NOPB![]() | LP38501TJ-ADJ/NOPB![]() | LP38501TS-ADJ/NOPB![]() | LP38501TSX-ADJ/NOPB![]() |
---|---|---|---|---|
Accuracy, % | 2 | 2 | 2 | 2 |
Iout(Max), A | 3 | 3 | 3 | 3 |
Iq(Typ), mA | 2 | 2 | 2 | 2 |
Noise, uVrms | 100 | 100 | 100 | 100 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 |
Output Capacitor Type | Ceramic | Ceramic | Ceramic | Ceramic |
Output Options | Adjustable Output | Adjustable Output | Adjustable Output | Adjustable Output |
PSRR @ 100KHz, dB | 25 | 25 | 25 | 25 |
Package Group | TO-263 | TO-263 | TO-263 | TO-263 |
Package Size: mm2:W x L, PKG | 5DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) | 5DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) | 5DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) | 5DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) |
Rating | Catalog | Catalog | Catalog | Catalog |
Regulated Outputs | 1 | 1 | 1 | 1 |
Special Features | Enable | Enable | Enable | Enable |
Thermal Resistance ОёJA, В°C/W | 33 | 33 | 33 | 33 |
Vdo(Typ), mV | 420 | 420 | 420 | 420 |
Vin(Max), V | 5.5 | 5.5 | 5.5 | 5.5 |
Vin(Min), V | 2.7 | 2.7 | 2.7 | 2.7 |
Vout(Max), V | 5 | 5 | 5 | 5 |
Vout(Min), V | 0.6 | 0.6 | 0.6 | 0.6 |
生态计划
LP38501ATJ-ADJ/NOPB | LP38501TJ-ADJ/NOPB | LP38501TS-ADJ/NOPB | LP38501TSX-ADJ/NOPB | |
---|---|---|---|---|
RoHS | Compliant | Compliant | Compliant | Compliant |
Pb Free | Yes | Yes |
应用须知
- Multi-Chip PackagesPDF, 95 Kb, 档案已发布: May 15, 2004
- AN-2219 Precision Current Limiting with the LMP8646 and LP38501 (Rev. A)PDF, 38 Kb, 修订版: A, 档案已发布: Apr 24, 2013
This application note discusses how to design the LMP8646 with the LP38501 voltage regulator and aresistive load application. - AN-1824 FlexCap Technology Simplifies LDO Design (Rev. A)PDF, 79 Kb, 修订版: A, 档案已发布: Apr 24, 2013
The low dropout (LDO) voltage regulator brings the advantage of power savings to system design byreducing the voltage required to maintain output regulation. However, the traditional LDO has alwaysbrought with it the disadvantage of placing tight restrictions on the equivalent series resistance (ESR) ofthe output capacitor in order to keep the regulator stable. This requirement has been elim
模型线
系列: LP38501-ADJ (4)
制造商分类
- Semiconductors> Power Management> Linear Regulator (LDO)> Single Channel LDO