Datasheet Texas Instruments MSP430F5528 — 数据表
| 制造商 | Texas Instruments |
| 系列 | MSP430F5528 |
16位超低功耗微控制器，128KB闪存，8KB RAM，USB，12Bit ADC，2个USCI，32Bit硬件MPY
数据表
MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet
PDF, 2.4 Mb, 修订版: M, 档案已发布: Nov 2, 2015
从文件中提取
价格
状态
| MSP430F5528IRGCR | MSP430F5528IRGCT | MSP430F5528IYFFR | MSP430F5528IZQE | MSP430F5528IZQER | |
|---|---|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes | Yes | Yes | Yes |
打包
| MSP430F5528IRGCR | MSP430F5528IRGCT | MSP430F5528IYFFR | MSP430F5528IZQE | MSP430F5528IZQER | |
|---|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 | 5 |
| Pin | 64 | 64 | 64 | 80 | 80 |
| Package Type | RGC | RGC | YFF | ZQE | ZQE |
| Industry STD Term | VQFN | VQFN | DSBGA | BGA MICROSTAR JUNIOR | BGA MICROSTAR JUNIOR |
| JEDEC Code | S-PQFP-N | S-PQFP-N | R-XBGA-N | S-PBGA-N | S-PBGA-N |
| Package QTY | 2000 | 250 | 2500 | 360 | 2500 |
| Carrier | LARGE T&R | SMALL T&R | LARGE T&R | JEDEC TRAY (5+1) | LARGE T&R |
| Device Marking | M430F5528 | M430F5528 | M430F5528 | M430F5528 | M430F5528 |
| Width (mm) | 9 | 9 | 5 | 5 | |
| Length (mm) | 9 | 9 | 5 | 5 | |
| Thickness (mm) | .88 | .88 | .4 | .74 | .74 |
| Pitch (mm) | .5 | .5 | .4 | .5 | .5 |
| Max Height (mm) | 1 | 1 | .625 | 1 | 1 |
| Mechanical Data | 下载 | 下载 | 下载 | 下载 | 下载 |
参数化
| Parameters / Models | MSP430F5528IRGCR | MSP430F5528IRGCT | MSP430F5528IYFFR | MSP430F5528IZQE | MSP430F5528IZQER |
|---|---|---|---|---|---|
| ADC | ADC12 - 10ch | ADC12 - 10ch | ADC12 - 10ch | ADC12 - 10ch | ADC12 - 10ch |
| AES | N/A | N/A | N/A | N/A | N/A |
| Active Power, uA/MHz | 404 | 404 | 404 | 404 | 404 |
| Additional Features | USB,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA | USB,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA | USB,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA | USB,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA | USB,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA |
| BSL | USB | USB | USB | USB | USB |
| CPU | MSP430 | MSP430 | MSP430 | MSP430 | MSP430 |
| Comparators | 8 | 8 | 8 | 8 | 8 |
| DMA | 3 | 3 | 3 | 3 | 3 |
| Featured | f5 | f5 | f5 | f5 | f5 |
| Frequency, MHz | 25 | 25 | 25 | 25 | 25 |
| GPIO Pins | 47 | 47 | 47 | 47 | 47 |
| I2C | 2 | 2 | 2 | 2 | 2 |
| Max VCC | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 |
| Min VCC | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
| Multiplier | 32x32 | 32x32 | 32x32 | 32x32 | 32x32 |
| Non-volatile Memory, KB | 128 | 128 | 128 | 128 | 128 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Group | VQFN | VQFN | DSBGA | BGA MICROSTAR JUNIOR | BGA MICROSTAR JUNIOR |
| Package Size: mm2:W x L, PKG | 64VQFN: 81 mm2: 9 x 9(VQFN) | 64VQFN: 81 mm2: 9 x 9(VQFN) | See datasheet (DSBGA) | 80BGA MICROSTAR JUNIOR: 25 mm2: 5 x 5(BGA MICROSTAR JUNIOR) | 80BGA MICROSTAR JUNIOR: 25 mm2: 5 x 5(BGA MICROSTAR JUNIOR) |
| RAM, KB | 8 | 8 | 8 | 8 | 8 |
| Rating | Catalog | Catalog | Catalog | Catalog | Catalog |
| SPI | 4 | 4 | 4 | 4 | 4 |
| Special I/O | N/A | N/A | N/A | N/A | N/A |
| Standby Power, LPM3-uA | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Timers - 16-bit | 4 | 4 | 4 | 4 | 4 |
| UART | 2 | 2 | 2 | 2 | 2 |
| Wakeup Time, us | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 |
生态计划
| MSP430F5528IRGCR | MSP430F5528IRGCT | MSP430F5528IYFFR | MSP430F5528IZQE | MSP430F5528IZQER | |
|---|---|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant |
应用须知
- Creating Autoplay Installers Using MSP430F5529 and CDFSPDF, 143 Kb, 档案已发布: Mar 14, 2012
This application report explains the implementation of using the CDFS feature of the Mass Storage Controller (MSC) API of the USB Developer’s Package for the MSP430в„ў Microcontroller.Utilizing Compact Disc File System (CDFS) as a file system on the storage medium allows a mass storage device to be recognized by a host as a standard read-only CD-ROM device. This allows software vendors to bundle i - Implementing a Thermocouple Interface With ADC12_APDF, 105 Kb, 档案已发布: Jul 19, 2011
This application report shows how to implement a single-chip thermocouple interface. The thermocouple interfaces with the MSP430F5529’s integrated 12-bit analog/digital converter (ADC12_A) through an operational amplifier circuit. The MSP430 encodes the thermocouple readings into a digital value, converts them to temperature, and stores them in memory. - Nine-Axis Sensor Fusion Using Direction Cosine Matrix Algorithm on MSP430F5xx (Rev. A)PDF, 943 Kb, 修订版: A, 档案已发布: Feb 13, 2012
This application report explains the implementation of an Attitude and Heading Reference System (AHRS), using the ultra-low-power MSP430F5xx microcontroller, a magnetometer, a gyroscope, and an accelerometer on all three axes. The calibration of the sensors is key to the accuracy of the algorithm, therefore, the sensors’ output must be calibrated before being input to the Direction Cosine Matrix ( - Capacitive Touch Sensing and SYS/BIOSPDF, 324 Kb, 档案已发布: Sep 12, 2012
SYS/BIOS is designed for use in embedded applications that need real-time scheduling, synchronization, and instrumentation. It provides preemptive multitasking, hardware abstraction, and memory management.This application report uses an adaptation of the capacitive touch library to interface with SYS/BIOS. Thisinterface abstracts the capacitive touch interface, promoting use of the graphical c - Multiple Time Bases on a Single MSP430 Timer Module (Rev. A)PDF, 143 Kb, 修订版: A, 档案已发布: Mar 27, 2015
The timer modules on MSP430в„ў ultra-low power microcontrollers often base several different outputs off of a single time base – a single timer period. This is especially true for the typical implementation of pulse width modulation (PWM) signals on the MSP430 devices, where one capture compare register (TxCCR0) sets the period, and the rest (TxCCRx) simply set different duty cycles. However, in som - USB Field Firmware Updates on MSP430 MCUs (Rev. C)PDF, 741 Kb, 修订版: C, 档案已发布: Nov 12, 2014
The USB solution for MSP430в„ў microcontrollers has been designed to make this process simple and straightforward. The device contains a USB-based on-chip bootstrap loader, and TI provides a Windows source project for downloading firmware that can be quickly customized. This source can be built with Visual C++ 2008 Express, available from Microsoft at no cost. For the USB support software for MSP430 - Starting a USB Design Using MSP430 MCUs (Rev. A)PDF, 949 Kb, 修订版: A, 档案已发布: May 30, 2014
This document is a high-level starting point for those wanting to design USB devices with MSP430в„ў MCUs. It provides an overview of the TI MSP430 hardware and software offerings for USB, as well as guidance in quickly getting started.Among the topics covered:An overview of the MSP430 hardware USB moduleAn introduction to the MSP430 USB Developer's Package - Using the USCI I2C Master (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 11, 2015
This document describes how to use the I2C master function set for MSP430в„ў devices with the USCI module. These functions can be used by MSP430 master devices to ensure proper initialization of the USCI module and provide I2C transmit and receive functionality. A similar version with DMA support has also been included. The USCI I2C master function set only supports single-master transmitter or rece - Features of the MSP430F5xx Bootstrap Loader (BSL) (Rev. C)PDF, 30 Kb, 修订版: C, 档案已发布: Feb 9, 2009
This application report has been superseded by the MSP430 Memory Programming User’s Guide (SLAU265). All information previously contained in this application report can be found in the user’s guide by clicking on the following links.Download MSP430 Memory Programming User's Guide (PDF)Download associate - Using the MSP430 Timer_D Module in Hi-Resolution ModePDF, 870 Kb, 档案已发布: Oct 2, 2013
This application report describes the use of the high-resolution feature of the Timer_D module introduced in MSP430F51x1 and MSP430F51x2 devices. Timer_D enables applications that require high resolution such as capacitive touch detection, PWM DACs, advanced LED lighting, and digital controllers for power supplies. This application report provides an advanced description of the use and calibration - MSP430x5xx Overview Comparison to MSP430x2xx and MSP430x4xxPDF, 81 Kb, 档案已发布: Jun 5, 2008
The MSP430x5xx series of devices is the latest addition to the MSP430 family of microcontrollers. Although there are many common features between the MSP430x5xx and MSP430x2xx/MSP430x4xx offerings, there are also several differences. This document gives a brief overview of differences between the device families. Detailed information regarding specific differences can be found in the respective mo - MSP430x5xx Quick Start GuidePDF, 118 Kb, 档案已发布: Jun 5, 2008
This quick start guide is intended to assist existing users of the MSP430 line of products in converting existing code to the new MSP430x5xx modules. While the modules operate in accordance with previous families, the MSP430x5xx modules include a number of enhancements which allow for more effective coding, expansions on current functionality and greater flexibility in the module and system operat - Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)PDF, 151 Kb, 修订版: D, 档案已发布: Nov 3, 2016
This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, 修订版: A, 档案已发布: Apr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl - Interfacing TMS320C5000 DSP to MSP430 Mixed Signal Microcontroller (Rev. A)PDF, 82 Kb, 修订版: A, 档案已发布: Oct 13, 2000
The TMS320C5000в„ў family of digital signal processors (DSPs) features Host Port Interface Controllers (HPI) and Direct Memory Access Controllers (DMAC) for efficient data movement without any CPU involvement. The HPI enables the DSP to interface to host processors (typically microcontrollers) bidirectionally with minimal or no external interface logic. This application report presents a hardw - MSP430 Capacitive Single-Touch Sensor Design GuidePDF, 770 Kb, 档案已发布: Jan 16, 2008
This application report discusses the design of RC-type capacitive single-touch sensors using the MSP430 microcontroller. The MSP430 has some unique features that make it suitable for interfacing with capacitive-touch sensors. The RC-type method does not need special peripherals and can be implemented with all devices in the MSP430 product family. This method is also inherently low power and can - MSP430 Software Coding Techniques (Rev. A)PDF, 62 Kb, 修订版: A, 档案已发布: Jul 17, 2006
This application report covers software techniques and topics of interest to all MSP430 programmers. The first part of the document discusses the MSP430 standard interrupt-based code flow model, recommended for the vast majority of applications. The next part discusses a handful of techniques that should be considered by any developer that sets out to develop an MSP430 application. Using these met - Programming a Flash-Based MSP430 Using the JTAG Interface (Rev. H)