Datasheet Texas Instruments MSP430FR4133 — 数据表
制造商 | Texas Instruments |
系列 | MSP430FR4133 |
具有16 KB FRAM,2 KB SRAM,60 IO,10通道ADC10,LCD,IR逻辑的16 MHz超低功耗微控制器
数据表
MSP430FR413x Mixed-Signal Microcontrollers datasheet
PDF, 1.8 Mb, 修订版: B, 档案已发布: Aug 14, 2015
从文件中提取
价格
状态
MSP430FR4133IG48 | MSP430FR4133IG48R | MSP430FR4133IG56 | MSP430FR4133IG56R | MSP430FR4133IPM | MSP430FR4133IPMR | |
---|---|---|---|---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | No | No | Yes | No | Yes | Yes |
打包
MSP430FR4133IG48 | MSP430FR4133IG48R | MSP430FR4133IG56 | MSP430FR4133IG56R | MSP430FR4133IPM | MSP430FR4133IPMR | |
---|---|---|---|---|---|---|
N | 1 | 2 | 3 | 4 | 5 | 6 |
Pin | 48 | 48 | 56 | 56 | 64 | 64 |
Package Type | DGG | DGG | DGG | DGG | PM | PM |
Industry STD Term | TSSOP | TSSOP | TSSOP | TSSOP | LQFP | LQFP |
JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDSO-G | S-PQFP-G | S-PQFP-G |
Package QTY | 40 | 2000 | 35 | 2000 | 160 | 1000 |
Carrier | TUBE | LARGE T&R | TUBE | LARGE T&R | JEDEC TRAY (10+1) | LARGE T&R |
Device Marking | FR4133 | FR4133 | FR4133 | FR4133 | FR4133 | FR4133 |
Width (mm) | 6.1 | 6.1 | 6.1 | 6.1 | 10 | 10 |
Length (mm) | 12.5 | 12.5 | 14 | 14 | 10 | 10 |
Thickness (mm) | 1.15 | 1.15 | 1.15 | 1.15 | 1.4 | 1.4 |
Pitch (mm) | .5 | .5 | .5 | .5 | .5 | .5 |
Max Height (mm) | 1.2 | 1.2 | 1.2 | 1.2 | 1.6 | 1.6 |
Mechanical Data | 下载 | 下载 | 下载 | 下载 | 下载 | 下载 |
参数化
Parameters / Models | MSP430FR4133IG48 | MSP430FR4133IG48R | MSP430FR4133IG56 | MSP430FR4133IG56R | MSP430FR4133IPM | MSP430FR4133IPMR |
---|---|---|---|---|---|---|
ADC | ADC10 - 10ch | ADC10 - 10ch | ADC10 - 10ch | ADC10 - 10ch | ADC10 - 10ch | ADC10 - 10ch |
AES | N/A | N/A | N/A | N/A | N/A | N/A |
Active Power, uA/MHz | 126 | 126 | 126 | 126 | 126 | 126 |
Additional Features | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset | LCD,Real-Time Clock,Watchdog,Temp Sensor,Brown Out Reset |
BSL | UART | UART | UART | UART | UART | UART |
CPU | MSP430 | MSP430 | MSP430 | MSP430 | MSP430 | MSP430 |
Featured | fr4 | fr4 | fr4 | fr4 | fr4 | fr4 |
Frequency, MHz | 16 | 16 | 16 | 16 | 16 | 16 |
GPIO Pins | 60 | 60 | 60 | 60 | 60 | 60 |
I2C | 1 | 1 | 1 | 1 | 1 | 1 |
Max VCC | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 |
Min VCC | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
Multiplier | N/A | N/A | N/A | N/A | N/A | N/A |
Non-volatile Memory, KB | 16 | 16 | 16 | 16 | 16 | 16 |
Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
Package Group | TSSOP | TSSOP | TSSOP | TSSOP | LQFP | LQFP |
Package Size: mm2:W x L, PKG | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP) | 64LQFP: 144 mm2: 12 x 12(LQFP) | 64LQFP: 144 mm2: 12 x 12(LQFP) |
RAM, KB | 2 | 2 | 2 | 2 | 2 | 2 |
Rating | Catalog | Catalog | Catalog | Catalog | Catalog | Catalog |
SPI | 2 | 2 | 2 | 2 | 2 | 2 |
Security Enabler | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection | Cryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection |
Special I/O | N/A | N/A | N/A | N/A | N/A | N/A |
Standby Power, LPM3-uA | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 |
Timers - 16-bit | 2 | 2 | 2 | 2 | 2 | 2 |
UART | 1 | 1 | 1 | 1 | 1 | 1 |
Wakeup Time, us | 10 | 10 | 10 | 10 | 10 | 10 |
生态计划
MSP430FR4133IG48 | MSP430FR4133IG48R | MSP430FR4133IG56 | MSP430FR4133IG56R | MSP430FR4133IPM | MSP430FR4133IPMR | |
---|---|---|---|---|---|---|
RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
应用须知
- RF430FRL152H NFC Sensor Tag Application Example With MSP430 MicrocontrollersPDF, 600 Kb, 档案已发布: Oct 11, 2016
Analog and digital sensors coupled together with wireless technology is an expanding use case across many different areas of growing technology such as diagnostics, data logging, and medical. Near Field Communication (NFC) technology has emerged as a viable option for many of those applications that can benefit from utilizing a contactless short-range wireless solution.Texas Instruments offers t - Software I2C on MSP430 MCUsPDF, 126 Kb, 档案已发布: May 18, 2016
Hardware and layout limitations often require smaller package sizes that could potentially create a tradeoff for the number of serial peripherals available to the user. With the I2C protocol, special software can be created to use a pair of simple GPIO ports to emulate an I2C master device. This allows programmers to be flexible with pin assignments and enables smaller package devices to overcome - Infrared Remote Control Implementation With MSP430FR4xx (Rev. B)PDF, 329 Kb, 修订版: B, 档案已发布: Jun 30, 2015
This application report provides an insight into several of the most frequently used infrared protocols and especially their flexible implementation using the TI MSP430FR4xx series of low-power microcontrollers.The MSP430FR4xx microcontrollers are primarily targeted at remote control application that are equipped with infrared modulation function and an LCD display. The infrared modulation combi - Migrating from the MSP430F4xx to Family to the MSP430FR4xx FamilyPDF, 194 Kb, 档案已发布: Oct 3, 2014
This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR4xx/FR2xx family of FRAM-based MCUs. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx/FR2xx devices, see the MSP430FR4xx and MSP430FR2xx Family User - VLO Calibration on the MSP430FR4xx and MSP430FR2xx Family (Rev. A)PDF, 78 Kb, 修订版: A, 档案已发布: Feb 19, 2016
MSP430FR4xx and MSP430FR2xx (FR4xx/FR2xx) family microcontrollers (MCUs) provide various clock sources, including some high-speed high-accuracy clocks and some low-power low-system-cost clocks. Users can select the best balance of performance, power consumption, and system cost. The on-chip very low-frequency oscillator (VLO) is a clock source with 10-kHz typical frequency included in FR4xx/FR2xx - MSP430 FRAM Technology – How To and Best PracticesPDF, 326 Kb, 档案已发布: Jun 23, 2014
FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif - MSP430 FRAM Quality and Reliability (Rev. A)PDF, 295 Kb, 修订版: A, 档案已发布: May 1, 2014
FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura - MSP430 Embedded Application Binary InterfacePDF, 596 Kb, 档案已发布: May 16, 2012
This document is a specification for the ELF-based Embedded Application Binary Interface (EABI) for the MSP430 family of processors from Texas Instruments. The EABI defines the low-level interface between programs, program components, and the execution environment, including the operating system if one is present. Components of the EABI include calling conventions, data layout and addressing conve - Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, 修订版: E, 档案已发布: May 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430 - Designing With MSP430 and Segment LCDs (Rev. A)PDF, 2.1 Mb, 修订版: A, 档案已发布: Jul 20, 2015
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, 修订版: A, 档案已发布: Apr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
模型线
系列: MSP430FR4133 (6)
制造商分类
- Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM