Datasheet Texas Instruments OPA170-Q1 — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA170-Q1 |
采用微型封装的汽车类36V，微功耗，轨至轨输出，通用运算放大器
数据表
OPAx170-Q1 36-V, Single-Supply, Low-Power, Automotive-Grade Operational Amplifiers datasheet
PDF, 1.3 Mb, 修订版: A, 档案已发布: Mar 24, 2017
从文件中提取
价格
状态
| OPA170AQDBVRQ1 | |
|---|---|
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| OPA170AQDBVRQ1 | |
|---|---|
| N | 1 |
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | 170Q |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | 下载 |
参数化
| Parameters / Models | OPA170AQDBVRQ1 |
|---|---|
| Additional Features | EMI Hardened |
| Architecture | CMOS |
| CMRR(Typ), dB | 120 |
| GBW(Typ), MHz | 1.2 |
| Input Bias Current(Max), pA | 15 |
| Iq per channel(Typ), mA | 0.1 |
| Number of Channels | 1 |
| Offset Drift(Typ), uV/C | 0.3 |
| Operating Temperature Range, C | -40 to 125 |
| Output Current(Typ), mA | 17 |
| Package Group | SOT-23 |
| Package Size: mm2:W x L, PKG | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
| Rail-to-Rail | In to V-,Out |
| Rating | Automotive |
| Slew Rate(Typ), V/us | 0.4 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 36 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 2.7 |
| Vn at 1kHz(Typ), nV/rtHz | 19 |
| Vos (Offset Voltage @ 25C)(Max), mV | 1.8 |
生态计划
| OPA170AQDBVRQ1 | |
|---|---|
| RoHS | Compliant |
应用须知
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA170-Q1 (1)
制造商分类
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps