Datasheet Texas Instruments SN54ACT373-SP — 数据表

制造商	Texas Instruments
系列	SN54ACT373-SP

数据表

价格

状态

打包

参数化

Parameters / Models	5962-8755601VRA
3-State Output	Yes
Bits	8
F @ Nom Voltage(Max), Mhz	90
ICC @ Nom Voltage(Max), mA	0.04
Input Type	TTL
Operating Temperature Range, C	-55 to 125
Output Drive (IOL/IOH)(Max), mA	24/-24
Output Type	CMOS
Package Group	CDIP
Package Size: mm2:W x L, PKG	See datasheet (CDIP)
Rating	Space
Technology Family	ACT
VCC(Max), V	5.5
VCC(Min), V	4.5
tpd @ Nom Voltage(Max), ns	11.5

生态计划

应用须知

• 下载
  Power-Up Behavior of Clocked Devices (Rev. A)
  PDF, 34 Kb, 修订版: A, 档案已发布: Feb 6, 2015
• 下载
  TI IBIS File Creation Validation and Distribution Processes
  PDF, 380 Kb, 档案已发布: Aug 29, 2002
  The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
• 下载
  Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
  PDF, 614 Kb, 修订版: C, 档案已发布: Dec 2, 2015
• 下载
  Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
  PDF, 337 Kb, 档案已发布: Jul 8, 2004
  Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
• 下载
  Selecting the Right Level Translation Solution (Rev. A)
  PDF, 313 Kb, 修订版: A, 档案已发布: Jun 22, 2004
  Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
• 下载
  Designing With Logic (Rev. C)
  PDF, 186 Kb, 修订版: C, 档案已发布: Jun 1, 1997
  Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
• 下载
  Introduction to Logic
  PDF, 93 Kb, 档案已发布: Apr 30, 2015
• 下载
  Implications of Slow or Floating CMOS Inputs (Rev. D)
  PDF, 260 Kb, 修订版: D, 档案已发布: Jun 23, 2016
• 下载
  CMOS Power Consumption and CPD Calculation (Rev. B)
  PDF, 89 Kb, 修订版: B, 档案已发布: Jun 1, 1997
  Reduction of power consumption makes a device more reliable. The need for devices that consume a minimum amount of power was a major driving force behind the development of CMOS technologies. As a result CMOS devices are best known for low power consumption. However for minimizing the power requirements of a board or a system simply knowing that CMOS devices may use less power than equivale
• 下载
  Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc
  PDF, 43 Kb, 档案已发布: Apr 1, 1996
  Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren

模型线

制造商分类

• Semiconductors> Space & High Reliability> Logic Products> Flip-Flop/Latch/Registers