Datasheet Texas Instruments SN74ALVC7806 — 数据表
制造商 | Texas Instruments |
系列 | SN74ALVC7806 |
256 x 18 3.3V异步FIFO存储器
数据表
256 X 18 Low-Power First-In, First-Out Memory datasheet
PDF, 187 Kb, 修订版: A, 档案已发布: Apr 1, 1998
从文件中提取
价格
状态
SN74ALVC7806-25DL | SN74ALVC7806-40DL | |
---|---|---|
Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | No | No |
打包
SN74ALVC7806-25DL | SN74ALVC7806-40DL | |
---|---|---|
N | 1 | 2 |
Pin | 56 | 56 |
Package Type | DL | DL |
Industry STD Term | SSOP | SSOP |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 20 | 20 |
Carrier | TUBE | TUBE |
Device Marking | ALVC7806-25 | ALVC7806-40 |
Width (mm) | 7.49 | 7.49 |
Length (mm) | 18.41 | 18.41 |
Thickness (mm) | 2.59 | 2.59 |
Pitch (mm) | .635 | .635 |
Max Height (mm) | 2.79 | 2.79 |
Mechanical Data | 下载 | 下载 |
生态计划
SN74ALVC7806-25DL | SN74ALVC7806-40DL | |
---|---|---|
RoHS | Compliant | Compliant |
应用须知
- Benefits & Issues of Migrating 5-V and 3.3-V Logic to Lower-Voltage Supplies (Rev. A)PDF, 154 Kb, 修订版: A, 档案已发布: Sep 8, 1999
In the last few years the trend toward reducing supply voltage (VCC) has continued as reflected in an additional specification of 2.5-V VCC for the AVC ALVT ALVC LVC LV and the CBTLV families.In this application report the different logic levels at VCC of 5 V 3.3 V 2.5 V and 1.8 V are compared. Within the report the possibilities for migration from 5-V logic and 3.3-V logic families - TI SN74ALVC16835 Component Specification Analysis for PC100PDF, 43 Kb, 档案已发布: Aug 3, 1998
The PC100 standard establishes design parameters for the PC SDRAM DIMM that is designed to operate at 100 MHz. The 168-pin, 8-byte, registered SDRAM DIMM is a JEDEC-defined device (JC-42.5-96-146A). Some of the defined signal paths include data signals, address signals, and control signals. This application report discusses the SN74ALVC16835 18-bit universal bus driver that is available from T - Power-Dissipation Calculations for TI FIFO Products (Rev. A)PDF, 106 Kb, 修订版: A, 档案已发布: Mar 1, 1996
Low power consumption is a major advantage of TI FIFO products. Power calculations are required to meet design requirements for chip temperature and system power. This document assists component and system designers in evaluating power consumption for the ACT and ABT FIFO products. Two examples of power calculations, one for the SN74ACT3632 bi-directional CMOS FIFO and one for the BiCMOS SN74ABT36 - Logic Solutions for PC-100 SDRAM Registered DIMMs (Rev. A)PDF, 96 Kb, 修订版: A, 档案已发布: May 13, 1998
Design of high-performance personal computer (PC) systems that are capable of meeting the needs imposed by modern operating systems and software includes the use of large banks of SDRAMs on DIMMs (see Figure 1).To meet the demands of stable functionality over the broad spectrum of operating environments, meet system timing needs, and to support data integrity, the loads presented by the large - 16-Bit Widebus Logic Families in 56-Ball 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B)PDF, 895 Kb, 修订版: B, 档案已发布: May 22, 2002
TI?s 56-ball MicroStar Jr.E package registered under JEDEC MO-225 has demonstrated through modeling and experimentation that it is an optimal solution for reducing inductance and capacitance improving thermal performance and minimizing board area usage in integrated bus functions. Multiple functions released in the 56-ball MicroStar Jr.E package have superior performance characteristics compa
模型线
系列: SN74ALVC7806 (2)
制造商分类
- Semiconductors> Logic> Flip-Flop/Latch/Register> FIFO Register