Datasheet Texas Instruments TAS5182 — 数据表
| 制造商 | Texas Instruments |
| 系列 | TAS5182 |
100W立体声数字放大器功率级控制器
数据表
TAS5182: 100-W Stereo Digital Amplifier Power Stage Controller datasheet
PDF, 413 Kb, 修订版: E, 档案已发布: May 12, 2004
从文件中提取
价格
状态
| TAS5182DCA | TAS5182IDCA | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No |
打包
| TAS5182DCA | TAS5182IDCA | |
|---|---|---|
| N | 1 | 2 |
| Pin | 56 | 56 |
| Package Type | DCA | DCA |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 35 | 35 |
| Carrier | TUBE | TUBE |
| Device Marking | TAS5182 | TAS5182I |
| Width (mm) | 6.1 | 6.1 |
| Length (mm) | 14 | 14 |
| Thickness (mm) | 1.15 | 1.15 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | 下载 | 下载 |
参数化
| Parameters / Models | TAS5182DCA | TAS5182IDCA |
|---|---|---|
| Audio Input Type | PWM | PWM |
| Control Interface | Hardware | Hardware |
| Operating Temperature Range, C | -40 to 85,0 to 70 | -40 to 85,0 to 70 |
| Output Power, W | 100 | 100 |
| Power Stage Supply(Max), V | 42 | 42 |
| Power to Bridge Tied Load(Max), W | 100 | 100 |
| Speaker Channels, Max | 2 | 2 |
| THD + N @ 1 kHz, % | 0.15 | 0.15 |
生态计划
| TAS5182DCA | TAS5182IDCA | |
|---|---|---|
| RoHS | Compliant | Compliant |
应用须知
- TAS5076-5182C6EVMPDF, 3.4 Mb, 档案已发布: Dec 18, 2003
The TAS5076-5182C6EVM board is a six channel Pure Path Digital??valuation module for the integrated circuits TAS5076PFC and TAS5182DCA from Texas Instruments (TI).The TAS5076PFC is a 24-bit multi-channel digital pulse width modulator based on EquibitTM technology. The TAS5182DCA is a high performance MOSFET gate driver withbuilt-in overcurrent and over temperature protection for the MOSFETs. - Power Supply Considerations for A/V ReceiversPDF, 319 Kb, 档案已发布: Dec 1, 2003
- Power Supply Recommendations for DVD ReceiversPDF, 153 Kb, 档案已发布: May 4, 2005
Selecting the optimal power supply for a non feed back digital amplifier can bechallenging. Music is dynamic, so the power consumption is changing dramatically,from almost zero to maximum within a few ms.Designing the power supply so powerful that it can deliver the total amplifier outputpower continuously is too costly and usually unnecessary.Designing the power supply too small gives p - PSRR for Purepath Digital Audio AmplifiersPDF, 159 Kb, 档案已发布: Apr 15, 2005
- AN-1737 Managing EMI in Class D Audio Applications (Rev. A)PDF, 140 Kb, 修订版: A, 档案已发布: May 1, 2013
Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit. - AN-1849 An Audio Amplifier Power Supply Design (Rev. B)PDF, 1.9 Mb, 修订版: B, 档案已发布: May 1, 2013
This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs. - Guidelines for Measuring Audio Power Amplifier PerformancePDF, 765 Kb, 档案已发布: Oct 30, 2001
This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
模型线
系列: TAS5182 (2)
制造商分类
- Semiconductors> Audio> High-Power Audio Amplifiers (>50W)> PWM Input Class-D