Datasheet Texas Instruments TDA3 — 数据表
制造商 | Texas Instruments |
系列 | TDA3 |
用于高级驾驶员辅助系统(ADAS)的SoC处理器
数据表
价格
状态
TDA3X | |
---|---|
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
生态计划
TDA3X | |
---|---|
RoHS | Not Compliant |
Pb Free | No |
应用须知
- TDA3xx Tester On Chip (TESOC)PDF, 374 Kb, 档案已发布: Jan 26, 2016
This application report explains how to use the Tester On Chip (hereafter mentioned as TESOC) module of TDA3xx SoC. It also provides detailed design information for using TESOC to run field tests on targeted modules in the TDA3xx System-on-Chip (SoC). Flow charts and other programming details are presented for writing code for TESOC. This document is intended for designers and programmers who wish - TDA3x Error Signaling Module (ESM)PDF, 402 Kb, 档案已发布: Jan 26, 2016
The Error Signaling Module (ESM) in TDA3x is used to report certain activity on the monitored signals at an external error pin or to the device CPUs through interrupt. The external error pin is normally used as a second indication path to switch off (or reset) the device by an external device. Therefore, the external controller is able to reset the device or keep the system in a fail-safe state by - TDA3xx ISS Tuning and Debug InfrastructurePDF, 89 Kb, 档案已发布: Jun 2, 2016
A camera system has many components including image sensor, optics and an Image Signal Processor (ISP). To get the best image quality, each subsystem must be configured to operate at the optimal level. The interdependencies between different subsystems must be utilized to get the best results. Additionally, there are many tradeoffs to be made while determining the best sensor and ISP configuration - DSS Bit Exact OutputPDF, 115 Kb, 档案已发布: Jan 11, 2016
The display subsystem (DSS) in TDA2xx, TDA2Ex and TDA3xx platform is used for displaying video data to external devices. But DSS can also be used as a high-speed data transfer port for any non video data. One of the basic requirements of the data transfer port is that the data that is present in the memory should not be modified before the data is sent out, which means the data sent should be bit - ECC/EDC on TDAxx (Rev. A)PDF, 109 Kb, 修订版: A, 档案已发布: Jul 5, 2017
TDA2x and TDA3x series of automotive processor are designed to be used in automotive safety systems. To enable safety, these processors come with error detection and correction (EDC) support for various memories. This application report provides an overview and usage description of EDC.
模型线
系列: TDA3 (1)
制造商分类
- Semiconductors> Processors> Automotive Processors> TDAx ADAS SoCs