Datasheet Texas Instruments TMS320F280049M — 数据表
制造商 | Texas Instruments |
系列 | TMS320F280049M |
Piccolo™微控制器
数据表
价格
状态
F280049MPMS | F280049MPZS | F280049MRSHS | XF280049MPMS | XF280049MPZS | |
---|---|---|---|---|---|
Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) | Preview (Device has been announced but is not in production. Samples may or may not be available) | Preview (Device has been announced but is not in production. Samples may or may not be available) | Active (Recommended for new designs) | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes | Yes | No | No | No |
打包
F280049MPMS | F280049MPZS | F280049MRSHS | XF280049MPMS | XF280049MPZS | |
---|---|---|---|---|---|
N | 1 | 2 | 3 | 4 | 5 |
Pin | 64 | 100 | 100 | 64 | 100 |
Package Type | PM | PZ | RSH | PM | PZ |
Industry STD Term | LQFP | LQFP | LQFP | LQFP | |
JEDEC Code | S-PQFP-G | S-PQFP-G | S-PQFP-G | S-PQFP-G | |
Package QTY | 90 | 90 | 90 | 90 | 90 |
Carrier | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) | |
Width (mm) | 10 | 14 | 10 | 14 | |
Length (mm) | 10 | 14 | 10 | 14 | |
Thickness (mm) | 1.4 | 1.4 | 1.4 | 1.4 | |
Pitch (mm) | .5 | .5 | .5 | .5 | |
Max Height (mm) | 1.6 | 1.6 | 1.6 | 1.6 | |
Mechanical Data | 下载 | 下载 | 下载 | 下载 |
参数化
Parameters / Models | F280049MPMS | F280049MPZS | F280049MRSHS | XF280049MPMS | XF280049MPZS |
---|---|---|---|---|---|
ADC, Ch | 21,14,12 | 21,14,12 | 21,14,12 | 21,14,12 | 21,14,12 |
ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
CAN | 2 | 2 | 2 | 2 | 2 |
CPU | C28x,CLA | C28x,CLA | C28x,CLA | C28x,CLA | C28x,CLA |
Comparators | 7,6,5 | 7,6,5 | 7,6,5 | 7,6,5 | 7,6,5 |
DMA, Ch | 6 | 6 | 6 | 6 | 6 |
FPU | Yes | Yes | Yes | Yes | Yes |
Flash, KB | 256 | 256 | 256 | 256 | 256 |
Frequency, MHz | 100 | 100 | 100 | 100 | 100 |
High Resolution PWM, Ch | 16 | 16 | 16 | 16 | 16 |
I2C | 1 | 1 | 1 | 1 | 1 |
Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 |
PGA/VGA | 7,5,4 | 7,5,4 | 7,5,4 | 7,5,4 | 7,5,4 |
PM Bus | 1 | 1 | 1 | 1 | 1 |
PWM, Ch | 16 | 16 | 16 | 16 | 16 |
Pin/Package | 100LQFP, 64LQFP | 100LQFP, 64LQFP | 100LQFP, 64LQFP | 100LQFP, 64LQFP | 100LQFP, 64LQFP |
QEP | 2,1 | 2,1 | 2,1 | 2,1 | 2,1 |
RAM, KB | 100 | 100 | 100 | 100 | 100 |
SPI | 2 | 2 | 2 | 2 | 2 |
Sigma-Delta Filter | 4,3 | 4,3 | 4,3 | 4,3 | 4,3 |
Total Processing, MIPS | 200 | 200 | 200 | 200 | 200 |
UART, SCI | 2 | 2 | 2 | 2 | 2 |
生态计划
F280049MPMS | F280049MPZS | F280049MRSHS | XF280049MPMS | XF280049MPZS | |
---|---|---|---|---|---|
RoHS | See ti.com | See ti.com | Not Compliant | See ti.com | See ti.com |
应用须知
- A Technical Introduction to the TMS320F28004x MicrocontrollerPDF, 549 Kb, 档案已发布: Mar 23, 2017
While many real-time control systems require a high-performance microcontroller (MCU), the tradeoffs of balancing performance and cost can be challenging. To this end, Texas Instruments developed the Piccoloв„ў TMS320F28004x MCU device series. This document discusses the technical details of the TMS320F28004x architecture and highlights the new improvements to various key peripherals, such as - Calculating Useful Lifetimes of Embedded ProcessorsPDF, 521 Kb, 档案已发布: Nov 11, 2014
This application report provides a methodology for calculating the useful lifetime of TI embedded processors (EP) under power when used in electronic systems. It is aimed at general engineers who wish to determine if the reliability of the TI EP meets the end system reliability requirement. - TMS320C28x FPU Primer (Rev. A)PDF, 228 Kb, 修订版: A, 档案已发布: Jul 20, 2009
This primer provides an overview of the floating-point unit (FPU) in the C2000в„ў Delfino microcontroller devices. - Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)PDF, 381 Kb, 修订版: A, 档案已发布: Sep 9, 2008
This application report presents a method for utilizing the on-chip pulse width modulated (PWM) signal generators on the TMS320F280xв„ў family of digital signal controllers as a digital-to-analog converter (DAC). The method involves analog low-pass filtering the PWM signal to remove high frequency components, leaving only the low-frequency content. Theoretical and experimental results are presented - Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L)PDF, 641 Kb, 修订版: L, 档案已发布: Feb 28, 2013
Several special requirements exist for running an application from on-chip Flash memory on the TMS320F28xxx. These requirements generally do not manifest themselves during code development in RAM since the Code Composer Studioв„ў (CCS) debugger can mask problems associated with initialized sections and their linkage in memory. This application report covers the application software modificatio - Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)PDF, 530 Kb, 修订版: D, 档案已发布: Feb 27, 2013
This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed. - Serial Flash Programming of C2000 Microcontrollers (Rev. B)PDF, 387 Kb, 修订版: B, 档案已发布: Feb 8, 2017
Often times, embedded processors must be programmed in situations where JTAG is not a viable optionfor programming the target device. When this is the case, the engineer must rely on some type of serial programming solution. C2000 devices aid in this endeavor through their inclusion of several program loading utilities included in ROM. These utilities are useful, but only solve half of the progr - Accelerators: Enhancing the Capabilities of the C2000 MCU Family Technical Brief (Rev. A)PDF, 155 Kb, 修订版: A, 档案已发布: Nov 8, 2016
Engineers designing real-time control systems are constantly faced with the challenge of optimizing performance. These systems require minimal processing latency in order to meet the control loop performance specifications. At the heart of the control systems are math intensive algorithms which are used to calculate the control signals. Utilizing a microcontroller (MCU) that can quickly and effici - Calculator for CAN Bit Timing ParametersPDF, 37 Kb, 档案已发布: Mar 22, 2016
Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat
模型线
系列: TMS320F280049M (5)
制造商分类
- Semiconductors> Microcontrollers (MCU)> Performance MCUs> Real-time Control> Piccolo F2802x/3x/5x/6x/7x