Datasheet Linear Technology LT1635IN8#PBF — 数据表

制造商Linear Technology
系列LT1635
零件号LT1635IN8#PBF

微功率、轨至轨运算放大器和基准

数据表

Datasheet LT1635
PDF, 242 Kb, 语言: en, 文件上传: Aug 6, 2017, 页数: 12
Micropower Rail-to-Rail Op Amp and Reference
从文件中提取

价格

打包

PackageN-8
Package CodeN
Package Index05-08-1510 (N8)

参数化

Demo BoardsDC417B
Design ToolsLTspice Model
Export Controlno
Initial Accuracy2.5 %
Min Vin/Vout DifferentialShunt V
Operating Temperature Range-40 to 85 °C
Quiescent or Min Shunt Current130 µA
Ref Vout0.2 V
Series/ShuntShunt
Temp Co30 ppm/В°C
Vin Max14 V

生态计划

RoHSCompliant

应用须知

  • High Voltage, Low Noise, DC/DC Converters &mdash AN118
    PDF, 2.6 Mb, 档案已发布: Mar 28, 2008
    Photomultipliers (PMT), avalanche photodiodes (APD), ultrasonic transducers, capacitance microphones, radiation detectors and similar devices require high voltage, low current bias. Additionally, the high voltage must be pristinely free of noise; well under a millivolt is a common requirement with a few hundred microvolts sometimes necessary. Normally, switching regulator configurations cannot achieve this performance level without employing special techniques. One aid to achieving low noise is that load currents rarely exceed 5mA. This freedom permits output filtering methods that are usually impractical.
    从文件中提取
  • Linear Technology Magazine Circuit Collection, Volume IV &mdash AN84
    PDF, 2.4 Mb, 档案已发布: Apr 1, 2000
    Application Note 84 is a collection of "power circuits" from the years 1996 through 1998 as seen in the pages of Linear Technology magazine. This Application Note collects circuits that can output tens of amps to circuits that can operate a handheld device for several years. In addition to a wide variety of traditional power supply circuits (Buck, Boost, Inverting, Flyback, Linear Regulators, etc.) we include circuits for charging batteries, several Power Management circuits as well as circuits that highlight a very low noise switching regulator.
    从文件中提取
  • Current Sources for Fiber Optic Lasers: A Compendium of Pleasant Current Events &mdash AN90
    PDF, 409 Kb, 档案已发布: Apr 1, 2002
    A large group of fiber optic lasers are powered by DC current. Laser drive is supplied by a current source with modulation added to the signal. The current source, although conceptually simple, constitutes an extraordinarily tricky design problem. There are a number of practical requirements for a fiber optic current source and failure to consider them can cause laser and/or optical component destruction. This application note describes ten laser current source circuits with a range of capabilities. High and low current types are presented, along with designs for grounded anode, cathode or floating operation. Each circuit also includes laser protection features. Appended sections cover laser load simulation and current source noise measurement techniques.
    从文件中提取

模型线

制造商分类

  • Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > High Voltage Amplifiers (>12V) | Low Power Amplifiers (Is < 1mA/amp) | Rail-to-Rail Amplifiers
  • Signal Conditioning > Voltage References > Reference Plus Comparator or Amplifier

其他名称:

LT1635IN8PBF, LT1635IN8 PBF