Datasheet Linear Technology LTC6244IMS8#PBF — 数据表

数据表

价格

打包

参数化

生态计划

其他选择

LTC6244HV

设计须知

• 下载
  Low Noise Amplifiers for Small and Large Area Photodiodes &mdash DN399
  PDF, 260 Kb, 档案已发布: Sep 19, 2006
  从文件中提取

  Low Noise Amplifiers for Small and Large Area Photodiodes
  Design Note 399
  Glen Brisebois Introduction
  Photodiodes can be broken into two categories: large
  area photodiodes with their attendant high capacitance
  (30pF to 3000pF) and smaller area photodiodes with
  relatively low capacitance (10pF or less). For optimal
  signal-to-noise performance, a transimpedance amplifier consisting of an inverting op amp and a feedback
  resistor is most commonly used to convert the photodiode current into voltage. In low noise amplifier design,
  large area photodiode amplifiers require more attention
  to reducing op amp input voltage noise, while small area
  photodiode amplifiers require more attention to reducing
  op amp input current noise and parasitic capacitances. Small Area Photodiode Amplifiers
  Small area photodiodes have very low capacitance,
  typically under 10pF and some even below 1pF. Their
  low capacitance makes them more approximate current
  sources to higher frequencies than large area photodiodes. One of the challenges of small area photodiode
  amplifier design is to maintain low input capacitance
  so that voltage noise does not become an issue and
  current noise dominates.
  Figure 1 shows a simple small area photodiode amplifier using the LTC В®6244. The input capacitance of
  CF
  0.1pF RF …

模型线

制造商分类

• Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Precision Amplifiers (Vos | High Speed Amplifiers (GBW > 50MHz) | Low Noise Amplifiers ( | Low Bias Current Amplifiers (Ib < 100pA) | Rail-to-Rail Amplifiers
• Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) Amplifiers

其他名称:

LTC6244IMS8PBF, LTC6244IMS8 PBF