STM8S001J3
16 MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data
EEPROM, 10-bit ADC, 3 timers, UART, SPI, I2C
Datasheet -preliminary data Features
Core 16 MHz advanced STM8 core with Harvard
architecture and 3-stage pipeline SO8N
4.9x6 mm or 150 mils width Extended instruction set Timers Memories Program memory: 8 Kbytes Flash memory;
data retention 20 years at 55 В°C after 100
cycles Advanced control timer: 16-bit, 2 CAPCOM
channels, 2 outputs, dead-time insertion and
flexible synchronization RAM: 1 Kbyte 16-bit general purpose timer, with 3 CAPCOM
channels (IC, OC or PWM) Data memory: 128-byte true data EEPROM;
endurance up to 100 k write/erase cycles 8-bit basic timer with 8-bit prescaler Clock, reset and supply management Window and independent watchdog timers 2.95 V to 5.5 V operating voltage Flexible clock control, 3 master clock sources
– External clock input
– Internal, user-trimmable 16 MHz RC
– Internal low-power 128 kHz RC Clock security system with clock monitor Power management
– Low-power modes (wait, active-halt, halt)
– Switch-off peripheral clocks individually
– Permanently active, low-consumption
power-on and power-down reset Communications interfaces UART, SmartCard, IrDA, LIN master mode SPI unidirectional interface up to 8 Mbit/s
(master simplex mode, slave receiver only) I2C interface up to 400 Kbit/s Analog to digital converter (ADC) 10-bit ADC, В± 1 LSB ADC with up to 3
multiplexed channels, scan mode and analog
watchdog I/Os Interrupt management Nested interrupt controller with 32 interrupts Up to 5 external interrupts Auto wakeup timer Up to 5 I/Os including 4 high-sink outputs Highly robust I/O design, immune against …