Datasheet Linear Technology LTC3601EMSE#TRPBF — 数据表

数据表

价格

打包

参数化

生态计划

文章

• 下载
  Two Monolithic DC/DC Converters Take 3.6V-15V Inputs Down to 0.6V at High Frequency, Shrinking Battery-Powered Applications in Everything from Handhelds to Automobiles &mdash LT Journal
  PDF, 829 Kb, 档案已发布: Jul 15, 2011
  从文件中提取

  Two Monolithic DC/DC Converters Take 3.6V–15V Inputs
  Down to 0.6V at High Frequency, Shrinking Battery-Powered
  Applications in Everything from Handhelds to Automobiles
  Mylien Tran and Theo Phillips When a relatively high voltage rail (12V) must be stepped down to a relatively low level
  (3.3V, 1.8V), the traditional go-to converter is a DC/DC switching controller that drives
  external MOSFETs. In many applications, replacing the typical controller-MOSFETdiode combo with a monolithic regulator would save space, design time and cost.
  The problem is that 12V rails are too high for many monolithic buck converters, which
  usually cannot be used with inputs above 6V. Additionally, switching losses typically
  prevent practical operation above ~1MHz, precluding the use of the smallest possible
  inductors, and in the end, negating some size advantages of a monolithic regulator.
  The LTC3601 and LTC3604 are high
  performance monolithic synchronous
  step-down regulators capable of supplying up to 1.5A and 2.5A, respectively. They
  operate from a wide input voltage range
  of 3.6V to 15V—a range encompassing
  battery chemistries found in handheld
  devices, PCs, and automobiles. Their
  unique constant frequency/controlled on
  time architecture has a minimum on-time
  of 20ns, ideal for high step-down ratio
  applications that demand high switching
  frequencies and fast transient response
  while maintaining high efficiency. …

模型线

制造商分类

• Power Management > Switching Regulator > Step-Down (Buck) Regulators > Internal Power Switch Buck

其他名称:

LTC3601EMSETRPBF, LTC3601EMSE TRPBF