Datasheet Analog Devices HMC611LP4E — 数据表

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC611LP4 / 611LP4E
v04.0309 60 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 -10000 MHz Typical Applications Features The HMC611LP4(E) is ideal for IF and RF applications in: Wide Dynamic Range: Up to 63 dB • Cellular/PCS/3G Supply Voltage: +5V • WiMAX, WiBro, WLAN, Fixed Wireless & Radar Excellent Stability over Temperature • Power Monitoring & Control Circuitry Buffered Temperature Sensor Output • Receiver Signal Strength Indication (RSSI) 24 Lead 4x4mm SMT Package: 16mm2 High Accuracy: ±1 dB with 54 dB Range Up to 8 GHz • Automatic Gain & Power Control 12
Functional Diagram POWER DETECTORS -SMT General Description
The HMC611LP4(E) Logarithmic Detector/Controller
converts RF signals at its input, to a proportional DC
voltage at its output. The HMC611LP4(E) employs
a successive compression topology which delivers
extremely high dynamic range and conversion accuracy
over a wide input frequency range. As the input power
is increased, successive amplifiers move into saturation
one by one creating an accurate approximation of the
logarithm function. The output of a series of square law
detectors is summed, converted into voltage domain
and buffered to drive the LOGOUT output. For detection
mode, the LOGOUT pin is shorted to the VSET input,
and will provide a nominal logarithmic slope of -25mV/
dB and an intercept of 18 dBm (22 dBm for ƒ ≥ 5.8 GHz).
The HMC611LP4(E) can also be used in the controller
mode where an external voltage is applied to the VSET
pin, to create an AGC or APC feedback loop. Electrical Specifi cations, TA = +25C[1] …

HMC611LP4 / 611LP4E
v04.0309 60 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 -10000 MHz Typical Applications Features The HMC611LP4(E) is ideal for IF and RF applications in: Wide Dynamic Range: Up to 63 dB • Cellular/PCS/3G Supply Voltage: +5V • WiMAX, WiBro, WLAN, Fixed Wireless & Radar Excellent Stability over Temperature • Power Monitoring & Control Circuitry Buffered Temperature Sensor Output • Receiver Signal Strength Indication (RSSI) 24 Lead 4x4mm SMT Package: 16mm2 High Accuracy: ±1 dB with 54 dB Range Up to 8 GHz • Automatic Gain & Power Control 12
Functional Diagram POWER DETECTORS -SMT General Description
The HMC611LP4(E) Logarithmic Detector/Controller
converts RF signals at its input, to a proportional DC
voltage at its output. The HMC611LP4(E) employs
a successive compression topology which delivers
extremely high dynamic range and conversion accuracy
over a wide input frequency range. As the input power
is increased, successive amplifiers move into saturation
one by one creating an accurate approximation of the
logarithm function. The output of a series of square law
detectors is summed, converted into voltage domain
and buffered to drive the LOGOUT output. For detection
mode, the LOGOUT pin is shorted to the VSET input,
and will provide a nominal logarithmic slope of -25mV/
dB and an intercept of 18 dBm (22 dBm for ƒ ≥ 5.8 GHz).
The HMC611LP4(E) can also be used in the controller
mode where an external voltage is applied to the VSET
pin, to create an AGC or APC feedback loop. Electrical Specifi cations, TA = +25C[1]
Parameter Typ. Typ. Typ. Typ. Typ. Units 1 -3600 5800 7000 8000 10000 MHz ±3 dB Dynamic Range 70 66 62 59 50 dB ±3 dB Dynamic Range Center -25 -23 -21 -20 -15 dBm ±1 dB Dynamic Range 60 61 58 52 42 dB Output Intercept 18 25 23 22 21 dBm Output Slope -25 -24 -26 -28 -32 mV/dB 7 5 8 20 28 mdB/°C Input Frequency Temperature Sensitivity @ -10 dBm Input [2] [1] Detector mode measurements; LOGOUT (Pin 15) is shorted to VSET (Pin 16).
[2] Measured from TA = -40°C to TA = +85°C 12 -48 For price, …