Datasheet Linear Technology LT1342 — 数据表

制造商	Linear Technology
系列	LT1342

具有3V逻辑接口的5V RS232收发器

数据表

PDF, 228 Kb, 修订版: A, 文件上传: Nov 12, 2017

从文件中提取

价格

打包

	LT1342CG#PBF	LT1342CG#TRPBF	LT1342CNW#PBF	LT1342CSW#PBF	LT1342CSW#TRPBF
N	1	2	3	4	5
Package	SSOP-28 包装外形图	SSOP-28 包装外形图	NW-28 包装外形图	SW-28 包装外形图	SW-28 包装外形图
Package Code	G	G	NW	SW	SW
Package Index	05-08-1640 (G28)	05-08-1640 (G28)	05-08-1520	05-08-1620 (SW28)	05-08-1620 (SW28)
Pin Count	28	28	28	28	28

参数化

Parameters / Models	LT1342CG#PBF	LT1342CG#TRPBF	LT1342CNW#PBF	LT1342CSW#PBF	LT1342CSW#TRPBF
Driver Disable	no	no	no	no	no
Drivers	3	3	3	3	3
ESD, kV	10	10	10	10	10
Export Control	no	no	no	no	no
IEC61000-4-2 Support	yes	yes	yes	yes	yes
Max Data Rate, Mbps	0.25	0.25	0.25	0.25	0.25
Operating Temperature Range, °C	0 to 70	0 to 70	0 to 70	0 to 70	0 to 70
Power, mW	60	60	60	60	60
Protocols Supported	RS232	RS232	RS232	RS232	RS232
Receivers	5	5	5	5	5
Shutdown	yes	yes	yes	yes	yes
Supply Voltage Range	5V	5V	5V	5V	5V
Voltage Gen Components	6 x 0.1ВµF	6 x 0.1ВµF	6 x 0.1ВµF	6 x 0.1ВµF	6 x 0.1ВµF

生态计划

	LT1342CG#PBF	LT1342CG#TRPBF	LT1342CNW#PBF	LT1342CSW#PBF	LT1342CSW#TRPBF
RoHS	Compliant	Compliant	Compliant	Compliant	Compliant

设计须知

下载
RS232 Interface Circuits for 3.3V Systems &mdash DN75
PDF, 105 Kb, 档案已发布: Oct 1, 1993
从文件中提取
RS232 Interface Circuits for 3.3V Systems вЂ“ Design Note 75 Gary Maulding
The rapid, widespread use of 3.3V logic circuits complicates the selection of RS232 interface circuits. The
optimum choice of an interface circuit should be based
upon several application dependent factors:
1) Logic circuitry connected to interface chip port mouse. The LTВ®1342, LT1330, and LT1331 are all
good RS232 transceiver choices for systems with both
5V and 3V power. Typical performance waveforms for
the LT1342 operating with VCC = 5V and VL = 3.3V are
shown in Figure 2. 2) Power supply voltages available
RECEIVER
OUTPUT 3) Power consumption constraints
4) Serial interface environment
5) Mouse driving requirements
As Figure 1 illustrates, 5V interface circuits cannot be
used to directly connect to 3.3V CMOS logic circuits.
The receiver output level will forward bias the logic
circuitвЂ™s input protection diode, causing large current
п¬‚ow. In the worst case the CMOS logic circuit may
latch up. Resistor voltage dividers or level shift buffers may be used to prevent forward biasing the CMOS
input diode, but an RS232 transceiver designed for 3V
logic application prevents this problem without extra
components or power dissipation.
Many of todayвЂ™s systems have both 5V and 3V power …

模型线

系列: LT1342 (5)

LT1342CG#PBF LT1342CG#TRPBF LT1342CNW#PBF LT1342CSW#PBF LT1342CSW#TRPBF

制造商分类

Interface > RS232/RS562 Transceivers

联络人