Datasheet Intersil EL5166IW-T7A — 数据表

DATASHEET
EL5166, EL5167 FN7365
Rev 6.00
September 14, 2010 1.4GHz Current Feedback Amplifiers with Enable
The EL5166 and EL5167 amplifiers are of the current
feedback variety and exhibit a very high bandwidth of
1.4GHz at AV = +1 and 800MHz at AV = +2. This makes
these amplifiers ideal for today's high speed video and
monitor applications, as well as a number of RF and IF
frequency designs. Features With a supply current of just 8.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
offer very high performance for little power consumption. Low noise = 1.7nV/пѓ–Hz The EL5166 also incorporates an enable and disable
function to reduce the supply current to 13ВµA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier. Fast enable/disable (EL5166 only) The EL5167 is offered in the 5 Ld SOT-23 package and the
EL5166 is available in the 6 Ld SOT-23 as well as the
industry-standard 8 Ld SOIC packages. Both operate over
the industrial temperature range of -40В°C to +85В°C. NC 1 VS-4 Single and dual supply operation from 5V to 12V 8.5mA supply current 600MHz family -(EL5164 and EL5165) 400MHz family -(EL5162 and EL5163) 200MHz family -(EL5160 and EL5161) Pb-free available (RoHS compliant) Applications + Cable drivers EL5166
(6 LD SOT-23)
TOP VIEW EL5166
(8 LD SOIC)
TOP VIEW IN+ 3 6000V/Вµs slew rate Video amplifiers Pinouts IN-2 Gain-of-1 bandwidth = 1.4GHz/gain-of-2
bandwidth = 800MHz 8 CE OUT 1 7 VS+ VS-2 6 OUT IN+ 3 RGB amplifiers …