Datasheet Intersil X9251US24I-2.7T1 — 数据表

DATASHEET
X9251 FN8166
Rev 6.00
December 3, 2014 Single Supply/Low Power/256-Tap/SPI Bus, Quad Digitally-Controlled (XDCPв„ў)
Potentiometer Features The X9251 integrates four digitally controlled potentiometers
(XDCP) on a monolithic CMOS integrated circuit. Four potentiometers in one package The digitally controlled potentiometers are implemented with
a combination of resistor elements and CMOS switches. The
position of the wipers are controlled by the user through the
SPI bus interface. Each potentiometer has associated with it a
volatile Wiper Counter Register (WCR) and four nonvolatile
Data Registers that can be directly written to and read by the
user. The content of the WCR controls the position of the wiper.
At power-up, the device recalls the content of the default Data
Registers of each DCP (DR00, DR10, DR20, and DR30) to the
corresponding WCR. 256 resistor taps–0.4% resolution SPI serial interface for write, read, and transfer operations of
the potentiometer Wiper resistance: 100О© typical at VCC = 5V 4 Nonvolatile data registers for each potentiometer Nonvolatile storage of multiple wiper positions Standby current <5ВµA max VCC: 2.7V to 5.5V operation The XDCP can be used as a three terminal potentiometer or as
a two terminal variable resistor in a wide variety of
applications including control, parameter adjustments, and
signal processing. 50kО© version of total resistance 100 year data retention Single supply version of X9250 Endurance: 100,000 data changes per bit per register 24 Ld SOIC, 24 Ld TSSOP Low power CMOS Pb-free (RoHS compliant) HOLD
A1 SPI
Interface A0
SO
SI RH1 RH0 VCC WCR0 …