Datasheet Intersil ISL90462UIE627-TK — 数据表

DATASHEET
ISL90462 FN8230
Rev 4.00
October 20, 2015 Single Volatile 32-tap XDCP Digitally Controlled Potentiometer (XDCPв„ў)
The Intersil ISL90462 is a digitally controlled potentiometer
(XDCP). Configured as a variable resistor, the device
consists of a resistor array, wiper switches, a control section,
and volatile memory. The wiper position is controlled by a 2pin Up /Down interface.
The potentiometer is implemented by a resistor array
composed of 31 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS and U/D inputs.
The device can be used in a wide variety of applications
including: Features Volatile Solid-State Potentiometer 2-pin UP/DN Interface DCP Terminal Voltage, 2.7V to 5.5V Tempco 35ppm/В°C Typical 32 Wiper Tap Points Low Power CMOS
-Active current, 25ВµA max.
-Supply current 0.3ВµA Available RTOTAL Values = 10kпЃ—пЂ¬пЂ 50kпЃ—пЂ¬пЂ 100kпЃ— LCD contrast control Temperature Range -40В°C to +85В°C Parameter and bias adjustments Packages
-6 Ld SC-70, SOT-23 Industrial and Automotive Control Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors Laser Diode driver biasing Pb-Free Plus Anneal Available (RoHS Compliant) Pinout
ISL90462
(SOT23, SC70)
TOP VIEW Gain control and offset adjustment VDD RH GND RW U/D CS Ordering Information
PART NUMBER PART MARKING ISL90462WIE627Z-TK (See Note) DEK RTOTAL (K) TEMP RANGE (В°C) 10 -40 to +85 6 Ld SC-70 (Pb-free) P6.049 -40 to +85 6 Ld SOT-23 (Pb-free) P6.064 -40 to +85 6 Ld SC-70 (Pb-free) P6.049 -40 to +85 6 Ld SOT-23 (Pb-free) P6.064 -40 to +85 6 Ld SC-70 (Pb-free) P6.049 -40 to +85 6 Ld SOT-23 (Pb-free) P6.064 ISL90462WIH627Z-TK (See Note) DEL …