DATASHEET
ISL71026M FN8915
Rev.0.00
May 3, 2017 3.3V CAN Transceiver, 1Mbps, Listen Mode, Loopback The ISL71026M is a radiation tolerant 3.3V CAN transceiver that is compatible with the ISO11898-2 standard for
applications calling for Controller Area Network (CAN) serial communication in satellites and aerospace
communications and telemetry data processing in harsh industrial environments.
The transceiver can transmit and receive at bus speeds of up to 1Mbps. The device is designed to operate across a
common mode range of -7V to +12V with a maximum of 120 nodes. The device has three discrete selectable driver
rise/fall time options, a listen mode feature, and loopback test capability.
The ISL71026M is available in a plastic 14 Ld TSSOP package. It operates across the temperature range of -55В°C to
+125В°C. The logic inputs are tolerant with 5V systems. Features ESD protection on all pins: 5kV HBM Bus pin fault protection to В±20V Cold spare: powered down devices/nodes will not affect active devices operating in parallel Three selectable driver rise and fall times Full fail-safe (open, short, terminated/undriven) receiver Quiescent supply current: 7mA (max), Listen mode supply current: 2mA (max) Tin (Sn) free lead finish with Ni/Pd/Au-Ag lead finish Characterized Radiation Level: 30krad(Si) at a low dose rate Single event effects at LET = 43MeVcm2/mg Applications Telemetry data processing in commercial satellites Low earth orbits (LEO) applications Launch vehicles and high altitude avionics Related Literature
For a full list of related documents, visit our website Tx DATA IN VCC
0.1ВµF 1 NC NC 14 2 D RS 13 3 GND CANH 12 CANH 4 NC CANL 11 CANL 5 VCC
R
NC NC
LBK
NC 10 6
7 Rx DATA OUT Typical Application FN8915 Rev.0.00
May 3, 2017 9
8 ВµCONTROLLER 4
D 0 4
0 3
2 …
