MCP1415/16
Tiny 1.5A, High-Speed Power MOSFET Driver
Features General Description High Peak Output Current: 1.5A (typical) Wide Input Supply Voltage Operating Range:
-4.5V to 18V Low Shoot-Through/Cross-Conduction Current in
Output Stage High Capacitive Load Drive Capability:
-470 pF in 13 ns (typical)
-1000 pF in 18 ns (typical) Short Delay Times: 44 ns (tD1), 47 ns (MCP1415
tD2), 54 ns (MCP1416 tD2) (typical) Low Supply Current:
-With Logic �1’ Input -0.65 mA (typical)
-With Logic �0’ Input -0.1 mA (typical) Latch-Up Protected: Withstands 500 mA Reverse
Current Logic Input Withstands Negative Swing up to 5V Space-Saving 5L SOT-23 Package The MCP1415/16 devices are high-speed, dual
MOSFET drivers that are capable of providing up to
1.5A of peak current while operating from a single 4.5V
to 18V supply. The inverting or non-inverting single
channel output is directly controlled from either TTL or
CMOS (3V to 18V) logic. These devices also feature
low shoot-through current, matched rise and fall time,
and short propagation delays which make them ideal
for high switching frequency applications. They provide
low enough impedances in both the �On’ and �Off’
states to ensure the intended state of the MOSFET is
not affected, even by large transients. Applications These devices are highly latch-up resistant under any
condition within their power and voltage ratings. They …