Datasheet Texas Instruments OPA2810IDGKR — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA2810 |
| 零件号 | OPA2810IDGKR |
高性能低成本轨到轨输入/输出HV FET运放8-VSSOP -40至125
数据表
OPA2810 Dual High-Performance, Low-Power, Wide Supply Range, Rail-to-Rail Input/Output FET-Input Operational Amplifier datasheet
PDF, 389 Kb, 档案已发布: Aug 1, 2017
从文件中提取
价格
状态
| Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) |
| Manufacture's Sample Availability | No |
打包
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | 下载 |
参数化
| Architecture | FET,Voltage FB |
| CMRR(Min) | 90 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 70 MHz |
| Input Bias Current(Max) | 20 pA |
| Iq per channel(Max) | 3.8 mA |
| Iq per channel(Typ) | 3.5 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 100 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 180 V/us |
| Total Supply Voltage(Max) | 27 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 4.75 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 5.7 nV/rtHz |
| Vn at Flatband(Typ) | 5.7 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
生态计划
| RoHS | See ti.com |
设计套件和评估模块
- Evaluation Modules & Boards: OPA2810DGKEVM
OPA2810 FET-input, Voltage-feedback Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA2810 (2)
- OPA2810IDGKR XOPA2810IDGKR
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)