Datasheet Texas Instruments OPA698ID — 数据表

制造商	Texas Instruments
系列	OPA698
零件号	OPA698ID

单位增益稳定的宽带电压限制放大器8-SOIC -40至85

数据表

下载

PDF, 837 Kb, 修订版: D, 档案已发布: Dec 30, 2008

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

打包

Pin	8	8
Package Type	D	D
Industry STD Term	SOIC	SOIC
JEDEC Code	R-PDSO-G	R-PDSO-G
Package QTY	75	75
Carrier	TUBE	TUBE
Device Marking	698	OPA
Width (mm)	3.91	3.91
Length (mm)	4.9	4.9
Thickness (mm)	1.58	1.58
Pitch (mm)	1.27	1.27
Max Height (mm)	1.75	1.75
Mechanical Data	下载	下载

参数化

2nd Harmonic	74 dBc
3rd Harmonic	87 dBc
@ MHz	5
Acl, min spec gain	1 V/V
Additional Features	N/A
Architecture	Voltage FB
BW @ Acl	450 MHz
CMRR(Min)	54 dB
CMRR(Typ)	61 dB
GBW(Typ)	250 MHz
Input Bias Current(Max)	10000000 pA
Iq per channel(Max)	15.9 mA
Iq per channel(Typ)	15.5 mA
Number of Channels	1
Offset Drift(Typ)	15 uV/C
Operating Temperature Range	-40 to 85 C
Output Current(Typ)	120 mA
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	1100 V/us
Total Supply Voltage(Max)	12 +5V=5, +/-5V=10
Total Supply Voltage(Min)	5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	11 nV/rtHz
Vn at Flatband(Typ)	5.6 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	6 mV

生态计划

RoHS

Compliant

设计套件和评估模块

Evaluation Modules & Boards: DEM-OPA-SO-1A
DEM-OPA-SO-1A Unpopulated PCB Compatible w/High Speed Wide Bandwidth Op Amps in 8-lead SOIC (D) Pkg
Lifecycle Status: Active (Recommended for new designs)
- 下载

应用须知

下载
ADC Input Protection
PDF, 145 Kb, 档案已发布: Sep 4, 2013
下载
Video Designs Using High-Speed Amplifiers (Rev. A)
PDF, 438 Kb, 修订版: A, 档案已发布: Feb 3, 2005
下载
RLC Filter Design for ADC Interface Applications (Rev. A)
PDF, 299 Kb, 修订版: A, 档案已发布: May 13, 2015
As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
下载
ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
PDF, 273 Kb, 档案已发布: Apr 22, 2004
Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
下载
Measuring Board Parasitics in High-Speed Analog Design
PDF, 134 Kb, 档案已发布: Jul 7, 2003
Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
下载
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

系列: OPA698 (4)

OPA698ID OPA698IDG4 OPA698IDR OPA698IDRG4

制造商分类

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)