Datasheet Texas Instruments TPS65150QPWPRQ1 — 数据表
制造商 | Texas Instruments |
系列 | TPS65150-Q1 |
零件号 | TPS65150QPWPRQ1 |
具有集成VCOM缓冲器24-HTSSOP -40至125的汽车,紧凑型LCD偏置电源
数据表
TPS65150-Q1 Automotive LCD Power Supply for Source and Gate Drivers with Gate Voltage Shaping and VCOM Buffer datasheet
PDF, 1.7 Mb, 修订版: C, 档案已发布: May 26, 2017
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 24 |
Package Type | PWP |
Industry STD Term | HTSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 2000 |
Carrier | LARGE T&R |
Width (mm) | 4.4 |
Length (mm) | 7.8 |
Thickness (mm) | 1 |
Pitch (mm) | 0.65 |
Max Height (mm) | 1.2 |
Mechanical Data | 下载 |
参数化
DisplayType | Automotive,LCD Unipolar |
IC Integration | LCD Bias |
Pin/Package | 24HTSSOP |
Source Driver Voltage(Max) | 15 V |
Source Driver Voltage(Min) | 5 V |
Special Function | Adjustable Sequencing,GPM/GVS,VCOM/OpAmp |
Target Application | 7 inches or less,7 to 13 inches |
Topology | Boost |
Vin(Max) | 6 V |
Vin(Min) | 1.8 V |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TPS65150EVM-697
TPS65150 Low Vin LCD power supply (bias) with integrated VCOM Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- How to Calculate the Output Voltage Ranges of the Charge Pumps in the TPS65150PDF, 265 Kb, 档案已发布: Feb 6, 2017
This application report tells you how to estimate the output voltage range of the charge pumps in theTPS65150. It assumes that the output current from each charge pump is 25 mA or less.This application report was written specifically for the TPS65150 but the principles in it are applicable toall devices that use the same charge-pump topology. - Understanding Undervoltage Lockout in Power Devices (Rev. A)PDF, 90 Kb, 修订版: A, 档案已发布: Sep 19, 2018
Many integrated circuits include an undervoltage lockout (UVLO) function to disable the device at low supply voltages. Below the minimum supply voltage the function and performance of a device may be undefined making it impossible to predict system behavior. This application note explains how to correctly understand the undervoltage lockout specification in the data sheets of TI's power products. - Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
模型线
系列: TPS65150-Q1 (1)
- TPS65150QPWPRQ1
制造商分类
- Semiconductors > Power Management > LCD/OLED Display Bias Solutions