Datasheet Texas Instruments ACF2101BP — 数据表
制造商 | Texas Instruments |
系列 | ACF2101 |
零件号 | ACF2101BP |
低噪声,双开关积分器24-PDIP
数据表
价格
状态
Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
Manufacture's Sample Availability | No |
打包
Pin | 24 |
Package Type | NT |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Width (mm) | 6.73 |
Length (mm) | 31.64 |
Thickness (mm) | 4.57 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | 下载 |
替代品
Replacement | ACF2101BU |
Replacement Code | F |
参数化
Additional Features | N/A |
Approx. Price (US$) | 21.06 | 1ku |
Architecture | N/A |
GBW(Typ)(MHz) | 2 |
Input Bias Current(Max)(pA) | 1 |
Iq per channel(Max)(mA) | 15.5 |
Iq per channel(Typ)(mA) | 15.5 |
Number of Channels(#) | 2 |
Offset Drift(Typ)(uV/C) | 5 |
Operating Temperature Range(C) | -40 to 125 |
Output Current(Typ)(mA) | 25 |
Package Group | SOIC |
Package Size: mm2:W x L (PKG) | See datasheet (PDIP) |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ)(V/us) | 3 |
Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 36 |
Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 14.5 |
Vos (Offset Voltage @ 25C)(Max)(mV) | 2 |
生态计划
RoHS | Not Compliant |
Pb Free | No |
应用须知
- Improved Noise Performance of the ACF2101 Switched IntegratorPDF, 42 Kb, 档案已发布: Sep 27, 2000
The signal-to-noise ratio and bandwidth of the combination of the ACF2101 dual, switched integrator and a low-level input current is exceptional when compared to the performance of a classical transimpedance amplifier. To further improve the ACF2101 signal-to-noise ratio, a resistor can be added in series with the input sensor. - The ACF2101 Used as a Bipolar Switched IntegratorPDF, 35 Kb, 档案已发布: Sep 27, 2000
The ACF2101 is a dual, switched integrator that is typically used to convert a positive input current to a negative output voltage by integration, using an integration capacitor (CINT), either on the chip or an external capacitor provided by the user. Typical applications for the ACF2101 are photo diode integrators, current measurements, charge measurements, and a CT scanner front end. - Comparison of Noise Performance of FET Transimpedence Amp/Switched IntegratorPDF, 66 Kb, 档案已发布: Sep 27, 2000
Low-input current FET operational amplifiers are universlly used to monitor photodetector, or more commonly photodiode currents. These photodetectors bridge the gap between a physical event, light, and electronics. There are a variey of amplifier configurations to select from and the choice is based on noise, bandwidth, offset, and linearity. A considerable amount has been written on the performan
模型线
系列: ACF2101 (3)
- ACF2101BP ACF2101BU ACF2101BUE4
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps