Datasheet Texas Instruments XCC1352R1F3RGZR — 数据表
| 制造商 | Texas Instruments |
| 系列 | CC1352R |
| 零件号 | XCC1352R1F3RGZR |
SimpleLink多频带CC1352R无线MCU 48-VQFN -40至85
数据表
CC1352R SimpleLink High-Performance Dual-Band Wireless MCU datasheet
PDF, 1.1 Mb, 档案已发布: Jan 16, 2018
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 48 |
| Package Type | RGZ |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 0.9 |
| Pitch (mm) | 0.5 |
| Max Height (mm) | 1 |
| Mechanical Data | 下载 |
参数化
| Bluetooth Standard | SPI,UART,I2S,I2C |
| Data Rate(Max) | 5000 kbps |
| Device Type | SimpleLink Wireless MCU |
| Package Group | VQFN |
| Package Size: mm2:W x L | 48VQFN: 49 mm2: 7 x 7(VQFN) PKG |
| Rating | Catalog |
| Security Enabler | Cryptographic acceleration,Debug security,Device identity,Software IP protection |
| Technology | Sub-1 GHz,Bluetooth low energy,Zigbee,Thread |
| Throughput(Max) | 5 Mbps |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Debug Probes/Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - Development Kits: LAUNCHXL-CC1352R1
SimpleLink Multi-Band CC1352R Wireless MCU LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Low-Power ADC Solution for CC13x2 and CC26x2PDF, 190 Kb, 档案已发布: Mar 2, 2018
The 12-bit analog-to-digital converter (ADC) peripheral block included in CC13x2 and CC26x2 deviceswhich is typically used by the Sensor Controller requires the SCLK_HF signal and is therefore notavailable in low-power (2 MHz) mode. The goal of this application note is to help users create an 8-bitsuccessive-approximation (SAR)-type low-power ADC using the CC13x2 and CC26x2 Sensor Con - Use of Low-power ZigbeeВ® and Thread With the SimpleLinkв„ў Wireless MCU FamilyPDF, 81 Kb, 档案已发布: Feb 27, 2018
- Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUsPDF, 88 Kb, 档案已发布: Feb 27, 2018
- Sensor Sequencing Using the CC13x2 and CC26x2 Sensor ControllerPDF, 252 Kb, 档案已发布: Mar 5, 2017
The purpose of this application note is to demonstrate how current consumption can be minimized bymaking the Sensor Controller automatically enable a sensor at a designated time period before the sensoris to be sampled. This implementation allows the Sensor Controller to stay in the lowest-possible powermode while the sensor boots and then start up when the sensor is ready. In this appl - Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor ControllerPDF, 87 Kb, 档案已发布: Feb 27, 2018
- Getting Started With the CC13xx and CC26xx Sensor ControllerPDF, 1.1 Mb, 档案已发布: Oct 6, 2017
This application note is intended as an introduction to the low-power Sensor Controller Engine found in theCC13xx and CC26xx devices. It explains the benefits of using the Sensor Controller in various use cases.The application note also describes how to get started using the Sensor Controller and directs you to therequired tools and collaterals.
模型线
系列: CC1352R (3)
- CC1352R1F3RGZR CC1352R1F3RGZT XCC1352R1F3RGZR
制造商分类
- Semiconductors > Wireless Connectivity > SimpleLink Solutions > Multi-Standard