Datasheet Texas Instruments XMS430FR2355TPTR — 数据表
| 制造商 | Texas Instruments |
| 系列 | MSP430FR2355 |
| 零件号 | XMS430FR2355TPTR |
具有32 KB FRAM，4 KB SRAM，44 IO，12位ADC，12位DAC，OpAmp / PGA 48-LQFP的24MHz 105C ULP微处理器-40至105
数据表
MSP430FR235x, MSP430FR215x Mixed-Signal Microcontrollers datasheet
PDF, 1.6 Mb, 档案已发布: May 10, 2018
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 48 |
| Package Type | PT |
| Industry STD Term | LQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | XFR2355 |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 1.4 |
| Pitch (mm) | 0.5 |
| Max Height (mm) | 1.6 |
| Mechanical Data | 下载 |
参数化
| ADC | 12-bit SAR |
| ADC: Channels | 12 |
| Bootloader | UART BSL |
| Comparator Channels | 2 |
| Featured | FR2 |
| Features | DAC,OpAmp,Real-Time Clock |
| GPIO Pins | 44 |
| I2C | 2 |
| Non-volatile Memory | 32 KB |
| Operating Temperature Range | -40 to 105 C |
| Package Group | LQFP |
| Package Size: mm2:W x L | 48LQFP: 81 mm2: 9 x 9(LQFP) PKG |
| RAM | 4 KB |
| SPI | 4 |
| Special I/O | N/A |
| Timers - 16-bit | 4 |
| UART | 2 |
| USB | No |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: MSP-TS430PT48
Target Development Board for MSP430FR2355 MCU - 48-pin (microcontroller not included)
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: MSP-EXP430FR2355
MSP430FR2355 LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
应用须知
- How to Use the Smart Analog Combo in MSP430 MCUsPDF, 486 Kb, 档案已发布: May 4, 2018
Operational amplifiers (Op Amps or OAs) are used extensively in sensing and measurement applications. MSP430 microcontrollers (MCUs) provide full signal chain implementation with the integrated Smart Analog Combo (SAC) to replace external Op Amps. The Smart Analog Combo is a configurable analog peripheral that includes a high-performance low-power Op Amp a programmable gain amplifier (PGA) with g - Migration From MSP430 FR58xx FR59xx and FR6xx to FR4xx and FR2xxPDF, 214 Kb, 档案已发布: May 4, 2018
This application report enables easy migration from the MSP430FR58xx MSP430FR59xx and MSP430FR6xx family to the MSP430FR4xx and MSP430FR2xx family. This report describes programming system and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the - Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, 修订版: E, 档案已发布: May 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430
模型线
系列: MSP430FR2355 (9)
制造商分类
- Semiconductors > Microcontrollers (MCU) > MSP430 Ultra-Low-Power MCUs > Value Line MCUs