Datasheet Analog Devices LTC4361IDC-2#TRMPBF — 数据表

LTC4361-1/LTC4361-2
Overvoltage/Overcurrent
Protection Controller
FEATURES DESCRIPTION 2.5V to 5.5V Operation
nn Overvoltage Protection Up to 80V
nn No Input Capacitor or TVS Required for Most
Applications
nn 2% Accurate 5.8V Overvoltage Threshold
nn 10% Accurate 50mV Overcurrent Circuit Breaker
nn VGATE(TH) to PWRGD Low l
l 25 0.25
65 1
105 µs
ms ON High to GATE Off VON = Step 0V to 2.5V l 2 5 µs Output Pins Delay Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime. Note 2: All currents into device pins are positive; all currents out of device
pins are negative. All voltages are referenced to GND unless otherwise
specified.
Note 3: An internal clamp limits VGATE to a minimum of 4.5V above VOUT.
Driving this pin to voltages beyond this clamp may damage the device.
Rev C For more information www.analog.com 3 LTC4361-1/LTC4361-2
TYPICAL PERFORMANCE CHARACTERISTICS …