Datasheet Texas Instruments TUSB6250PFC — 数据表
| 制造商 | Texas Instruments |
| 系列 | TUSB6250 |
| 零件号 | TUSB6250PFC |
USB 2.0低功耗，高速ATA / ATAPI桥解决方案80-TQFP 0至70
数据表
TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller datasheet
PDF, 542 Kb, 修订版: E, 档案已发布: Apr 4, 2008
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 80 | 80 |
| Package Type | PFC | PFC |
| Industry STD Term | TQFP | TQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 96 | 96 |
| Carrier | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) |
| Device Marking | TUSB6250PFC | *R |
| Width (mm) | 12 | 12 |
| Length (mm) | 12 | 12 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | 下载 | 下载 |
参数化
| Operating Temperature Range | 0 to 70 C |
| Package Group | TQFP |
| Package Size: mm2:W x L | 80TQFP: 196 mm2: 14 x 14(TQFP) PKG |
| Rating | Catalog |
| USB Speed | 480 Mbps |
生态计划
| RoHS | Compliant |
应用须知
- TUSB6250 Power Supply SequencingPDF, 39 Kb, 档案已发布: Feb 24, 2005
Power Supply Sequencing - TUSB6250 Bootcode Application NotePDF, 573 Kb, 档案已发布: Jan 7, 2004
The TUSB6250 bootcode is a start-up code stored as a ROM image within the TUS6250 device. An embedded microcontroller starts executing this code after power-on reset. Once the code is running, it loads application firmware from either an external memory device or the USB host controller. After the code has finished downloading, the bootcode releases its control to the application firmware.This - TUSB6250 FAQ (Rev. A)PDF, 695 Kb, 修订版: A, 档案已发布: Jan 28, 2005
This document is a compilation of frequently asked questions regarding the TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller. - Selection and Specification of Crystals for Texas Instruments USB 2.0 DevicesPDF, 61 Kb, 档案已发布: Dec 12, 2002
- Using the TUSBxxxx EEPROM Programmer (Rev. B)PDF, 264 Kb, 修订版: B, 档案已发布: Jun 9, 2011
- VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device ControllersPDF, 162 Kb, 档案已发布: Sep 24, 2003
System designers using TI USB controller devices must make certain design decisions involving the vendor ID (VID) and product ID (PID) of the USB device and the location of firmware. If these are not configured properly, the device will not be enumerated correctly by the USB host.This document discusses how these are handled within a system using one of the TI USB device controllers. These con
模型线
系列: TUSB6250 (3)
- TUSB6250PFC TUSB6250PFCG4 TUSB6250PFCR
制造商分类
- Semiconductors > Interface > USB > USB Controllers and Transceivers