Datasheet Analog Devices ADP2442ACPZ-R7 — 数据表

36 V,1 A, Synchronous, Step-Down, DC-to-DC
Regulator with External Clock Synchronization ADP2442 Data Sheet
FEATURES TYPICAL CIRCUIT CONFIGURATION Point of load applications
Distributed power systems
Industrial control supplies
Standard rail conversion to 24 V/12 V/5 V/3.3 V GENERAL DESCRIPTION
The ADP2442 is a constant frequency, current mode control,
synchronous, step-down, dc-to-dc regulator that is capable of
driving loads of up to 1 A with excellent line and load regulation
characteristics. The ADP2442 operates with a wide input voltage
range from 4.5 V to 36 V, which makes it ideal for regulating
power from a wide variety of sources. In addition, the ADP2442
has very low minimum on time (50 ns) and is, therefore, suitable
for applications requiring a very high step-down ratio.
The output voltage can be adjusted from 0.6 V to 0.9 × VIN. High
efficiency is obtained with integrated low resistance N-channel
MOSFETs for both high-side and low-side devices.
The switching frequency is adjustable from 300 kHz to 1 MHz with
an external resistor. The ADP2442 also has an accurate power-good
(PGOOD) open-drain output signal. C1
VOUT FB BST VCC RTOP AGND CBOOST VIN ADP2442 RBOTTOM FREQ
SYNC/
MODE EN PGOOD RCOMP VOUT SW COMP CCOMP VIN COUT CIN …