Datasheet Analog Devices HMC900LP5E — 数据表

HMC900LP5E
v04.0811 50 MHz DUAL PROGRAMMABLE
LOW PASS FILTER with DRIVER Typical Applications Features The HMC900LP5E is ideal for various modulation
systems: Low Noise Figure: 12 dB • Baseband filtering before A/D or after D/A converters
for point-to-point fixed wireless or base station
transceivers (GSM/GPRS, WCDMA & TD-SCDMA) Pre-programmed and/or Programmable Bandwidth:
3.5 MHz to 50 MHz. (Please see “HMC900LP5E
Ordering Information”) • Integrated direct conversion receiver (DCR) when
mated with mixer and VGA Integrated ADC Driver Amplifier • Software defined radio applications
• Anti-aliasing and reconstruction filters
• Test and measurement equipment 3 High linearity: Output IP3 +30 dBm Exceptional 3 dB Bandwidth Accuracy: ±2.5%
6th order Butterworth Magnitude & Phase Response
Automatic Filter Calibration
Externally Controlled Common Mode Output Level
Simplifies Interface
Filter Bypass Option: 100 MHz Bandwidth IF / BaseBAND Signal PROCESSING Read/Write Serial Port Interface (SPI)
32 Lead 5x5 mm SMT Package 25 mm2 Functional Diagram General Description
The HMC900LP5E is a 6th order, programmable
bandwidth, fully calibrated, dual low pass filter. It
features 0 or 10 dB input gain setting and supports
arbitrary bandwidths from 3.5 MHz to 50 MHz,
and when calibrated, is accurate to +/-2.5% of the
desired bandwidth. It includes a 100 MHz bandwidth …