Datasheet Texas Instruments TPS63806YFFR — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS63806 |
| 零件号 | TPS63806YFFR |
2.5A高效降压-升压转换器，在小型WCSP 15-DSBGA -40至125中具有优化的负载阶跃响应
数据表
TPS6380x 2-A, High-efficient, Low IQ Buck-boost Converter with Small Solution Size datasheet
PDF, 3.2 Mb, 修订版: B, 档案已发布: Nov 20, 2018
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 15 |
| Package Type | YFF |
| Industry STD Term | DSBGA |
| JEDEC Code | R-XBGA-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | TPS63806 |
| Thickness (mm) | 0.4 |
| Pitch (mm) | 0.4 |
| Max Height (mm) | 0.625 |
| Mechanical Data | 下载 |
参数化
| Approx. price | 1.05 | 1ku US$ |
| Duty cycle(Max) | 100 % |
| Features | Enable,Light Load Efficiency,Load Disconnect,Output Discharge,Power Good,Pre-Bias Start-Up,Synchronous Rectification,UVLO Fixed |
| Iout(Max) | 2.5 A |
| Iq(Typ) | 0.013 mA |
| Operating temperature range | -40 to 125 C |
| Package Group | DSBGA|15 |
| Rating | Catalog |
| Switch current limit(Min) | 5 A |
| Switch current limit(Typ) | 5.5 A |
| Switching frequency(Max) | 3100 kHz |
| Switching frequency(Min) | 500 kHz |
| Topology | Buck-Boost,Buck/Boost |
| Type | Converter |
| Vin(Max) | 5.5 V |
| Vin(Min) | 1.3 V |
| Vout(Max) | 5.2 V |
| Vout(Min) | 1.8 V |
生态计划
| RoHS | Compliant |
| Pb Free | Yes |
设计套件和评估模块
- Evaluation Modules & Boards: TPS63806EVM
TPS63806 high current; high efficiency buck-boost converter evaluation module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load ApplicationsPDF, 155 Kb, 档案已发布: Nov 28, 2018
When designing a battery powered system maximizing batterylife is one of the most important design goals. Battery powered systems such as smart meters IoT sensors or ireless medical equipment often require a power converter to obtain fixed supply voltages for time varying loads - Prevent Battery Overdischarge with Precise Threshold Enable PinPDF, 78 Kb, 档案已发布: Apr 2, 2019
Using a buck-boost converter is a convenient way to obtain a fixed supply voltage within the wide voltage range of typical batteries used in low-power devices such as smart meters wearables or those in the Internet of Things. - Selecting the right DC/DC converter for maximum battery lifePDF, 72 Kb, 档案已发布: Feb 8, 2019
Choosing the best topology for a battery powered application such as IoT sensor smart lock or IP camera might not always be straightforward based on the available and required voltages alone. - Using Non-Inverting Buck-Boost Converter for Voltage StabilizationPDF, 734 Kb, 档案已发布: Aug 1, 2019
- Supercapacitor backup power supply with TPS63802PDF, 665 Kb, 档案已发布: Jan 21, 2019
- Precise Delayed Start-up with Precise Threshold Enable-pinPDF, 188 Kb, 档案已发布: Apr 15, 2019
- Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A)PDF, 123 Kb, 修订版: A, 档案已发布: May 28, 2019
- Buck-Boost Converters Solving Power Challenges in Optical ModulesPDF, 45 Kb, 档案已发布: May 13, 2019
- Improving Load Transient Response for Controlled LoadsPDF, 338 Kb, 档案已发布: Sep 12, 2019
- Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)PDF, 400 Kb, 修订版: B, 档案已发布: Jul 9, 2018
This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed. - Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain OutputsPDF, 130 Kb, 档案已发布: Sep 19, 2011
模型线
系列: TPS63806 (1)
- TPS63806YFFR
制造商分类
- Semiconductors > Analog and Mixed-Signal > Power management > DC/DC switching regulators > Buck-boost & inverting > Buck-boost, inverting & split-rail converters (integrated switch)