Datasheet Texas Instruments XPS63810YFFT — 数据表
制造商 | Texas Instruments |
系列 | TPS63810 |
零件号 | XPS63810YFFT |
具有I²C接口的2.5A高效降压-升压转换器15-DSBGA -40至85
数据表
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 15 |
Package Type | YFF |
Industry STD Term | DSBGA |
JEDEC Code | R-XBGA-N |
Package QTY | 250 |
Carrier | SMALL T&R |
Thickness (mm) | 0.4 |
Pitch (mm) | 0.4 |
Max Height (mm) | 0.625 |
Mechanical Data | 下载 |
参数化
Approx. price | 1.09 | 1ku US$ |
Duty cycle(Max) | 100 % |
Features | Dynamic Voltage Scaling,Enable,Light Load Efficiency,Load Disconnect,Output Discharge,Power Good,Pre-Bias Start-Up,Synchronous Rectification,UVLO Fixed |
Iout(Max) | 2.5 A |
Iq(Typ) | 0.013 mA |
Operating temperature range | -40 to 85 C |
Package Group | DSBGA|15 |
Rating | Catalog |
Switch current limit(Min) | 5.2 A |
Switch current limit(Typ) | 5.8 A |
Switching frequency(Max) | 3100 kHz |
Switching frequency(Min) | 500 kHz |
Topology | Buck-Boost,Buck/Boost |
Type | Converter |
Vin(Max) | 5.5 V |
Vin(Min) | 1.9 V |
Vout(Max) | 5.2 V |
Vout(Min) | 1.825 V |
生态计划
RoHS | See ti.com |
应用须知
- Improve Efficiency in TWS Earbuds with Buck-Boost ConverterPDF, 86 Kb, 档案已发布: Sep 18, 2019
- Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load ApplicationsPDF, 155 Kb, 档案已发布: Nov 28, 2018
When designing a battery powered system maximizing batterylife is one of the most important design goals. Battery powered systems such as smart meters IoT sensors or ireless medical equipment often require a power converter to obtain fixed supply voltages for time varying loads - Prevent Battery Overdischarge with Precise Threshold Enable PinPDF, 78 Kb, 档案已发布: Apr 2, 2019
Using a buck-boost converter is a convenient way to obtain a fixed supply voltage within the wide voltage range of typical batteries used in low-power devices such as smart meters wearables or those in the Internet of Things. - Selecting the right DC/DC converter for maximum battery lifePDF, 72 Kb, 档案已发布: Feb 8, 2019
Choosing the best topology for a battery powered application such as IoT sensor smart lock or IP camera might not always be straightforward based on the available and required voltages alone. - Supercapacitor backup power supply with TPS63802PDF, 665 Kb, 档案已发布: Jan 21, 2019
- Using Non-Inverting Buck-Boost Converter for Voltage StabilizationPDF, 734 Kb, 档案已发布: Aug 1, 2019
- Precise Delayed Start-up with Precise Threshold Enable-pinPDF, 188 Kb, 档案已发布: Apr 15, 2019
- Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A)PDF, 123 Kb, 修订版: A, 档案已发布: May 28, 2019
- Buck-Boost Converters Solving Power Challenges in Optical ModulesPDF, 45 Kb, 档案已发布: May 13, 2019
- Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)PDF, 400 Kb, 修订版: B, 档案已发布: Jul 9, 2018
This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
模型线
系列: TPS63810 (2)
- TPS63810YFFR XPS63810YFFT
制造商分类
- Semiconductors > Analog and Mixed-Signal > Power management > DC/DC switching regulators > Buck-boost & inverting > Buck-boost, inverting & split-rail converters (integrated switch)