Datasheet Diodes AP22913 — 数据表

制造商	Diodes
系列	AP22913

单摆率控制负载开关

数据表

预览并下载

PDF, 1.6 Mb, 语言: en, 文件上传: Oct 30, 2019, 页数: 17
Single Slew Rate Controlled Load Switch

从文件中提取

AP22913
SINGLE SLEW RATE CONTROLLED LOAD SWITCH Description Pin Assignments The AP22913 slew rate controlled load switch is a single P-channel
MOSFET power switch designed for high-side load-switching
applications. The MOSFET has a typical RDS(ON) of 54mΩ at 5V (X1WLB0909-4) and a typical RDS(ON) of 84mΩ at 5V (SOT26), allowing (Top View) (Bottom View) NEW PRODUCT increased load current handling capacity with a low forward voltage
drop. The turn-on slew rate of the device is controlled internally. VIN
and VOUT are isolated during OFF state with TRCB (True Reverse
Current Blocking) feature.
The AP22913 load switch is designed to operate from 1.4V to 5.5V,
making it ideal for 1.8V, 2.5V, 3.3V and 5V systems. The typical
quiescent supply current is only 1µA.
X1-WLB0909-4
The AP22913 is available in the wafer level chip scale 4-pin, X1WLB0909-4 0.5mm pitch and standard SOT26 packages.
(Top View) Features Wide Input Voltage Range: 1.4V to 5.5V Low On-Resistance (X1-WLB0909-4):  92mΩ Typical @1.5V  76mΩ Typical @1.8V  56mΩ Typical @3.3V  54mΩ Typical @5.0V VOUT 1 6 VIN GND 2 5 GND ON 3 4 VIN Low On-Resistance (SOT26):
 122mΩ Typical @1.5V  106mΩ Typical @1.8V  86mΩ Typical @3.3V  84mΩ Typical @5.0V SOT26 Applications High DC Current Capability up to 2A Mobile Device and Smart Phones Truly Reverse Current Block (TRCB) Portable Media Devices Discharging Resistor on VOUT When Disabled Wearable Devices Ultra Low Quiescent Current 1µA Advanced Notebook, UMPC and MID Active-High Control Pin Portable Medical Devices  GPS and Navigation Equipment Minimum 1.1V VIH of ON ESD Protection:
 Human Body Model: 2kV  Charged Device Model: 1kV Package:
 X1-WLB0909-4 with Backside Laminate  0.9mm x 0.9mm, 0.5mm Ball Pitch  Standard Green SOT26 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Notes 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen-and Antimony-free, "Green" and
Lead-free.
3. Halogen-and Antimony-free "Green” products are defined as those which contain …

价格

详细说明

AP22913摆率受控负载开关是单P沟道MOSFET电源开关，设计用于高端负载开关应用。 MOSFET在5V时的典型RDS（ON）为54mΩ（X1- WLB0909-4），在5V时的典型RDS（ON）为84mΩ（SOT26），从而可在不降低正向压降的情况下提高负载电流处理能力。器件的开启摆率在内部进行控制。 VIN和VOUT在关断状态下通过TRCB（真反向电流阻断）功能进行隔离。

AP22913负载开关的工作电压范围为1.4V至5.5V，因此非常适合1.8V，2.5V，3.3V和5V系统。典型的静态电源电流仅为1μA。

AP22913采用4引脚晶圆级芯片规模，0.5mm间距X1-WLB0909-4和标准SOT26封装。

打包

	AP22913CN4-7	AP22913W6-7
N	1	2
Package	X1-WLB0909-4	X1-WLB0909-4

参数化

Parameters / Models	AP22913CN4-7	AP22913W6-7
Maximum Output Current	2 A	2 A
Number of Channels	1	1
Operating Ambient Temperature Range	-40 to 85 °C	-40 to 85 °C
Operating Voltage Range	1.4 to 5.5 V	1.4 to 5.5 V
Output Turn-On Rise Time Typ	660-1400?s	660-1400?s
RDS(ON)	54, 84 mΩ	54, 84 mΩ
Typical Quiescent Current	1 µA	1 µA

模型线

系列: AP22913 (2)

AP22913CN4-7 AP22913W6-7

制造商分类

Power Management > Protected Switches >