Datasheet Analog Devices RH3083MILDICE — 数据表

RH3083MK DICE/DWF
Adjustable 2.8A Single
Resistor Low Dropout
Regulator
Features Description Outputs May Be Paralleled for Higher Current and
Heat Spreading
n Single Resistor Sets Output Voltage
n Output Adjustable to 0V
n 50µA SET Pin Current: 1% Initial Accuracy
n Total Ionizing Dose (TID) Tolerance, per TM1019.8,
MIL-STD-883 up to: • 200kRad (Si), per Condition A, at 50Rads(Si)/sec • 100kRad (Si), per Condition D, at 10mRads(Si)/sec • ELDRS Pass 100kRad(Si)
n Single Event Latchup (SEL) Threshold Linear Energy
Transfer (LET) ≥ 110MeV • cm2/mg at TCASE = 100°C
n MIL-PRF-38535 Class V Compliant The RH3083 is a 2.8A low dropout linear regulator with a
unique architecture featuring a precision current source
and voltage follower which allows the output to be programmed to any voltage between zero and 18V. Multiple
regulators can be paralleled to increase total output current
and spread heat over a system PC board with no need for
heat sinking. The pass transistor collector can be brought
out independently of the circuit supply voltage to allow
dropout voltage to approach the saturation limit of the
pass transistor. A small 10µF capacitor on the output with
an ESR of less than 0.5Ω is adequate to ensure stability. …