Datasheet Diodes NA555S-13 — 数据表

NE555/SA555/NA555
PRECISION TIMERS
Description Pin Assignments NEW PRODUCT These devices are precision timing circuits capable of
producing accurate time delays or oscillation. In the timedelay or monostable mode of operation, the timed interval is
controlled by a single external resistor and capacitor network.
In the astable mode of operation, the frequency and duty
cycle can be controlled independently with two external
resistors and a single external capacitor.
The threshold and trigger levels normally are two-thirds and
one-third, respectively, of VCC. These levels can be altered
by use of the control-voltage terminal. When the trigger input
falls below the trigger level, the flip-flop is set, and the output
goes high. If the trigger input is above the trigger level and
the threshold input is above the threshold level, the flip-flop is
reset and the output is low. The reset (RESET) input can
override all other inputs and can be used to initiate a new
timing cycle. When RESET goes low, the flip-flop is reset,
and the output goes low. When the output is low, a lowimpedance path is provided between discharge (DISCH) and
ground. (Top View)
GND VCC TRIG DISCH OUT THRES RESET CONT
SO-8 The output circuit is capable of sinking or sourcing current up
to 200mA. Operation is specified for supplies of 5V to 15V.
With a 5-V supply, output levels are compatible with TTL …