Datasheet Analog Devices ADL8150ACHIP — 数据表

GaAs, HBT, MMIC, Low Phase Noise
Amplifier, 6 GHz to 14 GHz
ADL8150ACHIP Data Sheet
FEATURES FUNCTIONAL BLOCK DIAGRAM Output P1dB: 19 dBm (typical at 7 GHz to 11 GHz)
PSAT: 23 dBm (typical at 7 GHz to 14 GHz)
Gain: 13 dB (typical at 7 GHz to 11 GHz)
Output IP3: 31.5 dBm (typical at 7 GHz to 11 GHz)
Phase noise: −172 dBc/Hz at 10 kHz offset
VCC: 5 V at ICQ = 76 mA
Die size: 1.490 mm × 0.930 mm × 0.102 mm ADL8150ACHIP RFOUT/VCC
1 RFIN 23557-001 APPLICATIONS 2 Military and space
Test instrumentation Figure 1. GENERAL DESCRIPTION
The ADL8150ACHIP is a self biased, gallium arsenide (GaAs),
monolithic microwave integrated circuit (MMIC), heterojunction
bipolar transistor (HBT), low phase noise amplifier that operates
from 6 GHz to 14 GHz. The amplifier provides 13 dB of gain,
19 dBm output power for 1 dB gain compression (P1dB), and
an output third-order intercept (IP3) of 31.5 dBm at 7 GHz to
11 GHz. The amplifier requires 76 mA of quiescent collector Rev. 0 supply current (ICQ) from a 5 V supply voltage (VCC). The
ADL8150ACHIP also features inputs and outputs (I/Os) that are
internally matched to 50 Ω and facilitates integration into
multichip modules (MCMs). All data is taken with the chip
connected via two wire bonds that are 0.025 mm (1 mil) wide and …

FEATURES FUNCTIONAL BLOCK DIAGRAM OP1dB: 18 dBm (typical at 7 GHz to 12 GHz)
PSAT: 22 dBm (typical at 7 GHz to 12 GHz)
Gain: 12 dB (typical at 7 GHz to 12 GHz)
OIP3: 30 dBm typical
Phase noise: −172 dBc/Hz at 10 kHz offset
Supply voltage: 5 V at 74 mA
6-lead, 2 mm × 2 mm LFCSP RFIN 1
NC 2
GND 3 6 GND
5 NC
4 RFOUT/VCC 25523-001 Data Sheet GaAs, HBT, MMIC, Low Phase Noise
Amplifier, 6 GHz to 14 GHz
ADL8150 Figure 1. APPLICATIONS
Military and space
Test instrumentation
Communications GENERAL DESCRIPTION
The ADL8150 is a self biased gallium arsenide (GaAs),
monolithic microwave integrated circuit (MMIC), heterojunction
bipolar transistor (HBT), low phase noise amplifier that operates
from 6 GHz to 14 GHz. The amplifier provides 12 dB of typical
signal gain, 18 dBm output power at 1 dB gain compression
(OP1dB), and a typical output third-order intercept (OIP3) of
30 dBm. The amplifier requires 74 mA from a 5 V collector Rev. 0 supply voltage. The ADL8150 also features inputs and outputs …