Datasheet Analog Devices ADPA7007AEHZ — 数据表

20 GHz to 44 GHz, GaAs, pHEMT,
31.5 dBm (>1 W), MMIC Power Amplifier
ADPA7007 Data Sheet FUNCTIONAL BLOCK DIAGRAM
RFOUT GND VDET 16 15 14 VDD4 APPLICATIONS VDD5 3 11 VDD6 Military and space
Test instrumentation
Communications VGG1 4 10 VGG2 NIC 9 12 GND 8 VDD3 2 RFIN 7 VDD2 GND 6 13 NIC 5 VDD1 1 21544-001 GND
17 ADPA7007
VREF Output P1dB: 29 dBm typical at 34 GHz to 44 GHz
PSAT: 31.5 dBm typical at 26 GHz to 34 GHz
Gain: 20.5 dB typical at 34 GHz to 44 GHz
Output IP3: up to 42.5 dBm typical
Supply voltage: 5 V at 1400 mA
50 Ω matched input/output
18-terminal, 7 mm × 7 mm LCC_HS package
Integrated power detector 18 FEATURES Figure 1. GENERAL DESCRIPTION
The ADPA7007 is a gallium arsenide (GaAs), pseudomorphic
high electron mobility transfer (pHEMT), monolithic microwave
integrated circuit (MMIC), 31.5 dBm saturated output power
(>1 W) power amplifier, with an integrated temperature
compensated, on-chip power detector that operates between
20 GHz and 44 GHz. The ADPA7007 provides 20.5 dB of small
signal gain and approximately 32 dBm of saturated output power
at 32 GHz from a 5 V supply (see Figure 26). The ADPA7007 …

Data Sheet GaAs, pHEMT, MMIC,1 W Power Amplifier,
18 GHz to 44 GHz
ADPA7007CHIP FEATURES FUNCTIONAL BLOCK DIAGRAM Output P1dB: 31 dBm typical at 22 GHz to 36 GHz
PSAT: 32 dBm typical at 22 GHz to 36 GHz
Gain: 21.5 dB typical at 22 GHz to 36 GHz
Output IP3: 41 dBm typical at 22 GHz to 44 GHz
Supply voltage: 5 V typical at 1400 mA maximum
50 Ω matched input and output
Die size: 3.610 mm × 3.610 mm × 0.102 mm VGG1 VDD1 VDD3 VREF ADPA7007CHIP
RFIN
RFOUT APPLICATIONS
Military and space
Test instrumentation VGG2 VDD2 VDD4 21924-001 VDET Figure 1. GENERAL DESCRIPTION
The ADPA7007CHIP is a gallium arsenide (GaAs),
pseudomorphic high electron mobility transistor (pHEMT),
monolithic microwave integrated circuit (MMIC), distributed
power amplifier that operates from 18 GHz to 44 GHz. The
amplifier provides a gain of 21.5 dB, an output power for 1 dB
compression (P1dB) of 31 dBm, and a typical output third-Rev. 0 order intercept (IP3) of 41 dBm. The ADPA7007CHIP requires
1400 mA from a 5 V supply on the supply voltage (VDD) and
features inputs and outputs that are internally matched to 50 Ω,
facilitating integration into multichip modules (MCMs). All
data was taken with the chip connected via two 0.025 mm wire …