Datasheet ON Semiconductor ADT7461ARZ — 数据表

ADT7461
+15C Temperature Monitor
with Series Resistance
Cancellation
The ADT7461 is a dual-channel digital thermometer and under/over
temperature alarm intended for use in PCs and thermal management
systems. It is pin-and register-compatible with the ADM1032. The
ADT7461 has three additional features: series resistance cancellation
(where up to 3 kW (typical) of resistance in series with the temperature
monitoring diode may be automatically cancelled from the temperature
result, allowing noise filtering); configurable ALERT output; and an
extended, switchable temperature measurement range. The ADT7461
can accurately measure the temperature of a remote thermal diode to
±1°C and the ambient temperature to ±3°C. The temperature
measurement range defaults to 0°C to +127°C, compatible with the
ADM1032, but can be switched to a wider measurement range of −55°C
to +150°C. The ADT7461 communicates over a 2-wire serial interface
compatible with system management bus (SMBus) standards. An
ALERT output signals when the on-chip or remote temperature is out of
range. The THERM output is a comparator output that allows on/off
control of a cooling fan. The ALERT output can be reconfigured as a
second THERM output, if required.
The SMBus address of the ADT7461 is 0x4C. An ADT7461-2 is also …