Datasheet ON Semiconductor SA5230DR2 — 数据表

Operational Amplifier, Low
Voltage
NCV5230
The NCV5230 is a very low voltage operational amplifier that can
perform with a voltage supply as low as 1.8 V or as high as 15 V.
In addition, split or single supplies can be used, and the output will
swing to ground when applying the latter. There is a bias adjusting pin
which controls the supply current required by the device and thereby
controls its power consumption. If the part is operated at ±0.9 V
supply voltages, the current required is only 110 mA when the current
control pin is left open. Even with this low power consumption, the
device obtains a typical unity gain bandwidth of 250 kHz. When the
bias adjusting pin is connected to the negative supply, the unity gain
bandwidth is typically 600 kHz while the supply current is increased
to 600 mA. In this mode, the part will supply full power output beyond
the audio range.
The NCV5230 also has a unique input stage that allows the
common−mode input range to go above the positive and below the
negative supply voltages by 250 mV. This provides for the largest
possible input voltages for low voltage applications. The part is also
internally−compensated to reduce external component count.
The NCV5230 has a low input bias current of typically ±40 nA, and
a large open−loop gain of 125 dB. These two specifications are …