Datasheet Analog Devices MAX6035BAUR30+ — 数据表

19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision
Voltage Reference in SOT23
The MAX6035 is a high-voltage, precision micropower
voltage reference. This three-terminal device is available
with output voltage options of 2.5V, 3.0V, and 5.0V. It is an
excellent upgrade for industry-standard devices such as
the REF02 and REF43. The MAX6035 offers 14x lower
power than the REF02 and 5x lower power than the
REF43, as well as a reduced package size from an 8-pin
SO to a 3-pin SOT23. The MAX6035 features a proprietary
temperature coefficient curvature-correction circuit and
laser-trimmed, thin-film resistors that result in a very low
temperature coefficient of 25ppm/°C (max) and an initial
accuracy of ±0.2% (max).
The MAX6035 typically draws only 73µA of supply current and can source 10mA or sink 2mA of load current.
Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external
resistor, this device offers a supply current that is virtually independent of the supply voltage and does not
require an external resistor. Additionally, this internally
compensated device does not require an external compensation capacitor, but is also stable with capacitive
loads up to 5µF. Eliminating the external compensation
capacitor saves valuable board area in space-critical
applications. The supply independent, ultra-low supply
current makes this device ideal for battery-operated, …